Propeller Shaft · Shaft Line & Propulsion
The Scana Propeller Shaft 400 is a 400 mm diameter forged‑steel shaft designed for the main propulsion line of marine vessels, offering high torsional strength and dimensional stability; listed capacity 400 mm diameter. As a Propeller Shaft, it is normally installed in the main propulsion shaft line between the engine or gearbox and the propeller. In that role, its primary purpose is to transmit propulsion torque while remaining accurately aligned and supported by shaft bearings. Propeller shafts extend to the propeller and stern tube, while intermediate shafts connect shaft-line sections inside the vessel; both are critical rotating structural components. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect shaft surfaces where accessible, flange joints, coupling bolts, alignment references and bearing behaviour. Review vibration, bearing-temperature and alignment trends and pay particular attention after grounding, propeller damage or major propulsion work. Non-destructive examination should follow the approved survey or repair plan. Refer to the manufacturer and class documentation for the exact figure for alignment, runout, crack and wear limits.
Carry approved coupling bolts, nuts, locking devices, shaft-seal interface parts and repair provisions identified for the installed shaft line; complete shafts are normally strategic shore spares.
Free of charge — send us your request for Scana equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Scana first.
Tell us what you need for this Scana Propeller Shaft 400 — a part, a service call, a second opinion. Are you Scana? Claim this brand page.
Service engineer? Write the day report for this Propeller Shaft 400 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.