"> DVZ DVZ SKA-M 50
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
DVZ

DVZ SKA-M 50

DVZ DVZ SKA-M 50 — Galley & Domestic, marine sewage treatment; source metadata also lists capacity 50 PE. The supplied category identifies the equipment as Sewage Treatment Plant, and it is normally installed in the potable-water or utility treatment system with pumps, filters, dosing or treatment equipment and water-quality monitoring as applicable. In that listed role, its primary purpose is to disinfect, soften, condition or otherwise treat shipboard water for safe or reliable use. UV sterilizers, softeners, mineral dosing and chlorination systems use different treatment mechanisms, so consumables and water-quality control must match the installed process. Within the supplied list, this variant is distinguished from neighbouring entries by its model designation and the explicitly listed capacity; further hardware differences are not stated in the source. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

50 PE
Capacity

Components & Design

Component data being added…

Technical Data

treatment type biological
person equivalent 50
origin Germany

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Scale, exhausted media or dirty treatment surfaces reduce treatment effectiveness and cause poor water quality
Lamp, dosing pump, valve or power-supply faults cause loss of treatment and system alarms
Sensor, conductivity or dosing-control faults cause under-treatment, over-treatment or false indication
Filter or strainer blockage reduces flow and increases differential pressure
Seal, vessel or piping leakage causes water loss and may contaminate the treatment area

Service & Maintenance

Inspect treatment elements, filters, pumps, dosing equipment, sensors, valves and leakage according to the installed process. Trend water-quality results and replace or regenerate treatment media using approved procedures. Keep chemical and UV safety controls intact. Refer to the manufacturer documentation for the exact figure for dose, flow, regeneration and water-quality criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry filters, lamps or treatment media as applicable, pump seals, dosing tubing, sensors, valve parts and approved treatment consumables.
Equipment Model #68610 · ✓ still in production