Oily Water Separator (15 ppm) · Oily Water Separator
Wärtsilä Hamworthy OWTP 5 m³/h is a 15 ppm oily-water separator. It is installed in the engine-room bilge-treatment area and connected to bilge holding, recirculation, discharge and monitoring arrangements. Its purpose is to treat oily machinery-space bilge water before any permitted overboard discharge through the vessel's approved pollution-prevention system. Separation stages, filter media, feed arrangement and oil-content monitoring architecture are model-specific and form part of the approved installation. The exact model designation and the listed capacity distinguish treatment throughput and internal configuration from neighboring OWS units; refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect separator chambers, coalescing or filter elements, sample lines, oil-content monitor, automatic stopping or recirculation devices and associated valves. Keep bilge feed as free as practicable from detergents and emulsifying chemicals that can impair separation. Flush and clean sample lines and sensors according to the approved manual and verify alarms and automatic diversion functions after maintenance. Check the piping arrangement against approved drawings and ensure no bypass route compromises the system. Maintain required operating and calibration records. Refer to the manufacturer documentation for the exact figure for test methods, element replacement criteria and operating limits.
Keep approved separation or filter elements, seals, gaskets, sample tubing, monitor service items, valve-actuator consumables and feed-pump spares recommended for the installed system. Any oil-content monitor replacement or calibration component must match approved equipment. Use only parts accepted for the certified configuration.
Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Wärtsilä first.
Tell us what you need for this Wärtsilä Hamworthy OWTP 5.0 m³/h — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.
Service engineer? Write the day report for this Hamworthy OWTP 5.0 m³/h in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.