"> MSA MSA AirMaXX
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
MSA

MSA AirMaXX

MSA MSA AirMaXX is a self-contained breathing apparatus for marine emergency response listed in the supplied equipment record. It is normally installed in designated fire-control, accommodation or machinery-space emergency lockers where crew can reach it quickly. Its primary purpose is to provide breathable air to trained crew entering smoke-filled, toxic or oxygen-deficient spaces. Unlike filter respirators, SCBA carries its own compressed-air supply and therefore remains independent of the surrounding atmosphere for the approved operating period. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

equipment type scba
solas type EN 137
model code AirMaXX

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Cylinder leakage or insufficient pressure reduces available breathing-air duration and is identified during pre-use checks
Regulator or demand-valve malfunction causes difficult breathing, free flow or unstable mask pressure
Face-mask seal damage causes inward leakage and is noticed during the user seal check
Harness, buckle or hose damage makes the set difficult or unsafe to wear and may expose hoses to snagging
Low-pressure alarm or gauge failure prevents reliable indication of remaining air and is found during functional testing

Service & Maintenance

Inspect cylinder condition, pressure, valve, reducer, hoses, demand valve, mask, harness, gauge and low-pressure alarm. Confirm cleanliness and readiness after every use and ensure cylinders remain within required inspection and charging controls. Functional tests must follow manufacturer and statutory procedures. Do not invent cylinder pressure limits or test intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved mask seals, straps, hoses, demand-valve service items where onboard servicing is permitted and compatible spare cylinders or charging support according to the vessel fire plan.
Equipment Model #68015 · ✓ still in production