"> Hella Marine NaviLED Pro
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 105 verified suppliers & service companies for Hella Marine in the Maritime Network Find suppliers →
Is Hella Marine your company? Claim this page
Hella Marine

NaviLED Pro

Hella Marine NaviLED Pro is identified in the source list as a navigation lights. It is mounted at the vessel position required by the approved lighting or signaling arrangement, with switching and monitoring equipment located as required by the ship design. Its purpose is to provide the visual indication, navigation signal or emergency illumination identified by the equipment category. The source record provides the existing record note 'Signaling & Visual'. The light source, lens or optic, housing, mounting, power supply and monitoring circuit form part of the approved installation. The exact model designation distinguishes light source, optical pattern, enclosure and electrical arrangement from neighboring units; refer to the approved light plan and manufacturer documentation for the exact figures.

Components & Design

Component data being added…

Technical Data

equipment category nav_lights
technology LED
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Lamp or LED-module failure caused by component aging or electrical fault, resulting in loss of the required light or a monitoring alarm
●Lens or diffuser contamination caused by salt, dirt, grease or paint, resulting in reduced visible intensity
●Water ingress caused by seal, gland or housing damage, resulting in corrosion, short circuits or intermittent operation
●Power or monitoring-circuit fault caused by wiring, fuse, battery or panel problems, resulting in loss of illumination or false alarm
●Mounting, sector or orientation error caused by mechanical damage or maintenance work, resulting in incorrect light direction or obstruction

Service & Maintenance

Inspect the light fitting, lens, seals, mounting, cable glands and unobstructed field of view where applicable. Function-test the light and any bridge or emergency failure indication using the vessel's approved procedure. Replace lamps or modules only with approved components that preserve the intended optical and electrical performance. Check backup or emergency supply arrangements where fitted and verify labeling at the relevant panel. Prevent paint or structural changes from obstructing required sectors. Refer to the approved vessel plan and manufacturer documentation for exact installation and servicing requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved replacement lamps or LED modules where serviceable, fuses, seals, cable glands and selected monitoring-panel components. Spare complete fittings may be appropriate for critical or exposed positions. Replacement parts must preserve the approved optical and electrical characteristics.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Hella Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #67622 · ✓ still in production