"> Sailor SAILOR 250
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 27 verified suppliers & service companies for Sailor in the Maritime Network Find suppliers →
Is Sailor your company? Claim this page
Sailor

SAILOR 250

Sailor SAILOR 250 is a shipboard satellite communications terminal listed in the supplied equipment record. It is normally installed with antenna equipment above deck and indoor modem, control or communication units connected to bridge or vessel networks. Its primary purpose is to provide long-range satellite voice, data, safety or operational communications according to the installed service. Compared with terrestrial VHF or MF/HF radio, satellite communication depends on terminal registration, antenna view of the satellite, modem configuration and network service availability. The model designation identifies a particular manufacturer configuration, but the supplied record does not define every hardware, material, control, or certification difference to adjacent models. For exact ratings, dimensions, settings, materials, connection details, and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

equipment category fleet_broadband
solas approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Antenna obstruction, tracking fault or damaged radome causes loss of satellite lock, poor signal quality or repeated connection drops
●Modem, terminal or network-interface failure causes unavailable data or voice services despite normal ship power
●Power-supply or UPS faults cause terminal rebooting, blank displays or complete service loss
●Cabling, connector or Ethernet faults cause intermittent connectivity or loss of interfaces to ship systems
●Configuration, registration or service-provider problems prevent log-in or message transfer even when hardware tests appear normal

Service & Maintenance

Inspect antenna or radome, mounting, cabling, indoor units, power supply and network interfaces. Review signal-quality and terminal logs for recurring dropouts. Confirm vessel identity, service configuration and emergency functions where applicable. Antenna alignment, software and network settings should only be changed using approved documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuses, power supplies where supported, network and RF cables, connectors, approved modem or terminal modules where vessel policy requires them and backed-up configuration information.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Sailor?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #67619 · ✓ still in production