7S90ME-C10.5
The Hyundai 7S90ME-C10.5 is a low‑speed, inline 7‑cylinder two‑stroke main engine with electronic ME‑C control, designed for medium‑size cargo vessels and offering fuel flexibility (HFO, VLSFO, MGO).
Engine Specifications
Inspector Detail
✓ verified
▸
Common issues
- Excessive cylinder liner wear due to inadequate fuel quality or improper injection timing
- Scavenge air leakage leading to reduced engine efficiency and increased emissions
- Fuel pump and injector wear, resulting in poor combustion and increased maintenance costs
- Crankpin bearing wear, potentially causing engine vibration and damage
- Turbocharger fouling or failure, impacting engine performance and efficiency
- Lube oil contamination, affecting engine longevity and reliability
- Exhaust valve issues, including leakage or burning, due to inadequate maintenance or overheating
Inspection checklist
- Cylinder head and valve condition
- Piston and ring condition
- Crankshaft and bearing condition
- Fuel injection system and pump condition
- Turbocharger condition and performance
- Lube oil system and filter condition
- Exhaust system and valve condition
- Scavenge air system and filter condition
- Engine control system and sensor condition
Service intervals
| oil_change | 1000-1500 hours |
| fuel_injector_overhaul | 5000-7500 hours |
| cylinder_liner_replacement | 15000-20000 hours |
| valve_overhaul | 10000-15000 hours |
| turbocharger_overhaul | 20000-30000 hours |
Typical wear limits
| cylinder_liner | 0.5-1.0 mm wear limit |
| piston_ring | 0.5-1.0 mm wear limit |
| crankpin_bearing | 0.1-0.5 mm wear limit |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
Critical spares
- Cylinder liners
- Piston rings
- Fuel injectors
- Crankshaft bearings
- Turbocharger components
- Exhaust valves
- Lube oil pumps
Safety
- Risk of explosion or fire due to fuel leakage or improper handling
- Injury from moving parts or hot surfaces
- Asphyxiation from inadequate ventilation in enclosed spaces
Class survey
The class surveyor will typically check the engine's overall condition, including the cylinder head, piston, and crankshaft, as well as the fuel injection system, turbocharger, and lube oil system. They will also verify that the engine is properly maintained and that all necessary repairs and overhauls have been performed.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →