UEC45LSE-Eco
The Mitsubishi UEC45LSE‑Eco is a medium‑speed, electronically controlled two‑stroke diesel main engine designed for bulk carriers and tankers, notable for its high fuel efficiency and low emissions.
Engine Specifications
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Borescope inspection of exhaust valve seats for scratches/wear, dye penetrant test for cracks, leakage measurements (valve should hold pressure under compressed air for 15 min)
Liner surface inspection for scratches/grooves, piston run gemietlich measurement, lubricant flow rate check (wrong parameters for part load operation)
Measure pressure drop across cooler, check air temperature after cooler, inspect drainage separator for water accumulation
Tägliche Kurbelgehäuse-Ölprobe auf Weißmetall-Partikel (>0.5 mm mit glatter Oberfläche beidseitig = Überbelastung), Lagerspiel-Kontrolle per Schieblehre
Check crankshaft bearing flanges with magnifying glass for cracks; crankshaft deflection measurement via dial gauge (indicator set: <0.1 mm critical)
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →Manuals
- datasheet
- project_guide