"> Heila Cranes Heila HLRM 15000
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Heila Cranes in the Maritime Network Find suppliers →
Heila Cranes

Heila HLRM 15000

Heila Cranes Heila HLRM 15000 is listed in this library as a marine deck-handling machine in the Deck Cranes / Deck Crane (Cargo) category. Equipment of this class is typically installed on an exposed working deck, cargo deck, offshore handling area, or near the equipment it is intended to move or tension. Its shipboard purpose is to lift, lower, pull, tension, transfer, or otherwise handle loads, lines, hoses, cables, gangways, or cargo according to the installed arrangement. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. The source data records the following model-specific information: Kapazität is listed as 15t SWL. Where adjacent models in the same product family differ in rating, size, materials, control options, certification, or accessories, refer to the manufacturer documentation for the exact model-specific differences.

15t SWL
Capacity

Components & Design

Component data being added…

Technical Data

crane type knuckle_boom
drive type hydraulic
swl tonnes 15

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Hydraulic leakage, low system pressure, pump wear, or valve faults cause slow, jerky, or weak movement
Wire rope, chain, sheave, drum, bearing, or structural wear from load cycles and corrosion causes visible damage, noise, poor spooling, or increased play
Brake, clutch, or holding-device wear causes load creep, slipping, or inability to hold position
Limit switch, encoder, load sensor, interlock, or control-system faults cause restricted movement, nuisance shutdowns, or loss of automatic functions
Corrosion, damaged hoses or cables, loose fasteners, or foundation defects from deck exposure cause leakage, unreliable controls, or structural concerns

Service & Maintenance

Inspect structural members and foundations, wire ropes or chains, drums and sheaves, brakes, hydraulic hoses and cylinders, lubrication points, guards, emergency stops, limit devices, load indicators where fitted, and local/remote controls. Load tests and acceptance limits must follow class, flag, vessel, and manufacturer documentation.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical spares include hydraulic seals and hose items, brake components, wire-rope or chain accessories as applicable, bearings or bushes, limit switches, control joysticks or sensors, solenoids, and critical electrical control parts recommended by the manufacturer.
Equipment Model #66909 · ✓ still in production