Liebherr Fixed Slewing Cranes
Fixed slewing cranes are a space-saving material handling solution that copes well with special infrastructure requirements. The LFS series is based on The series of Liebherr fixed slewing cranes (LFS) is particularly suitable for harbours with restricted space. In Indonesia, our Liebherr fixed slewing cranes LFS 180 have been in operation since 2009, particularly in the area of coal handling. When stress levels on the ground have to be kept low and space in the harbour is limited, an LFS is the preferred choice. The crane series is based on the market-leading mobile harbour crane concept from Liebherr. Instead of a rubber tyre undercarriage, the LFS is mounted on a permanently-installed base pillar. This reduces the amount of space required and ensures high productivity rates from the mobile harbour crane range at the same time.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual daily inspection per ISO 4309:2017; caliper for diameter; magnetic inductive inspection (MRI) for suspected internal damage; inspection points: drum anchorage, loading, deflection over sheaves, loaded rope sections
Visual inspection for lubricant leakage; check seals for wear and contamination; vibration and temperature monitoring; overhaul by qualified Liebherr service with specialized equipment if needed
Drucktest (Pressure Test) gegen spezifizierte Solldrücke; Sichtprüfung auf Flüssigkeitsverluste; Ölprobenanalyse (Condition Monitoring); Funktionsprüfung aller Hubfunktionen (Heben, Schwenken, Luffing)
Visual surface inspection for surface cracks and deformation; NDT inspection (X-ray/MRI) at critical hooks for internal damage; load test: ~25% above rated load capacity; inspection of hook locking and wear marks
Surface rust and corrosion by visual inspection; NDT inspection (ultrasonic, X-ray) at critical welds; dimensional check of geometric tolerances; overhaul by Service Centre Steel with welding/structural analysis if required
Visual inspection of all electrical connections for corrosion in saltwater environment; functional test of overload protection and indicators; continuity test of critical circuits; lithium battery/accumulator condition check on electro-hydraulic systems
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →