"> Liebherr Maritime LHM 600 Mobile Harbour Crane
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Liebherr Maritime

LHM 600 Mobile Harbour Crane

The LHM 600 is characterised by rapid and efficient handling of loads up to 208 tonnes. It also optimally manages the handling of containers, as well as general and bulk cargoes. With an outreach of up to 61 metres, the LHM 600 is the ideal handling solution for ships up to New-Panamax size.

Components & Design

Component data being added…

Technical Data

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Wire rope wear: diameter reduction >10% (natural fibre core) or >5% (steel core), wire breaks in groups, kinks, waves, twists, corrosion, pitting

Visual daily inspection per ISO 4309:2017; caliper for diameter; magnetic inductive inspection (MRI) for suspected internal damage; inspection points: drum anchorage, loading, deflection over sheaves, loaded rope sections

Slewing ring: sealing system worn (leaks, contaminated lubrication), tooth wear (check engagement), bearing clearance, vibrations, temperature increase

Visual inspection for lubricant leakage; check seals for wear and contamination; vibration and temperature monitoring; overhaul by qualified Liebherr service with specialized equipment if needed

Hydraulic system: pressure loss, leaks at cylinders/pipes, hydraulic fluid contaminated or oxidized, valve and control function impaired

Drucktest (Pressure Test) gegen spezifizierte Solldrücke; Sichtprüfung auf Flüssigkeitsverluste; Ölprobenanalyse (Condition Monitoring); Funktionsprüfung aller Hubfunktionen (Heben, Schwenken, Luffing)

Hook/Hook-block: cracks, plastic deformation, wear on running surfaces, notches or scratches, damage to load deflection surfaces

Visual surface inspection for surface cracks and deformation; NDT inspection (X-ray/MRI) at critical hooks for internal damage; load test: ~25% above rated load capacity; inspection of hook locking and wear marks

Steel structure / boom / jib: corrosion, surface cracks (especially at welds and load introduction points), plastic deformation, welded repairs

Surface rust and corrosion by visual inspection; NDT inspection (ultrasonic, X-ray) at critical welds; dimensional check of geometric tolerances; overhaul by Service Centre Steel with welding/structural analysis if required

Electrical / control (Litronic system): cable insulation faults, connectors/contacts oxidized or corroded, malfunction of control systems, overload/underload

Visual inspection of all electrical connections for corrosion in saltwater environment; functional test of overload protection and indicators; continuity test of critical circuits; lithium battery/accumulator condition check on electro-hydraulic systems

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #64568 · ✓ still in production