Kongsberg Actuator steering gear

The actuator gear is a cost-effective and reliable solution particularly where full shock standards are not required The actuator gear is a cost-effective and reliable solution, particularly where full shock standard is required These gears are bespoke designed to customer requirements and offer high performance at low cost. Furthermore, use of the actuator type means fewer interface surfaces on board because the actuator's anchor brackets can be welded directly on to the hull cartridge. This means that actuator steering gear is less tolerance-critical for installation. If problems occur with the hydraulic driving mechanism, replacing an actuator is easier than a rotary vane or a ram type of steering gear. The hydraulic power units can be configured to meet specific customer requirements. It can also be delivered as a dual or single power units. Get expert help anytime, anywhere—our global support team is available 24/7 to assist you. Upgrade your systems with tailored retrofit solutions to extend vessel life and boost performance. Explore our training programs to build skills, ensure safety, and maximize operational efficiency. Our Global Customer Support works 24/7 to provide prompt responses, technical expertise and global assistance from key locations in 32 countries. EMEA:+47 33 03 24 07APAC:+65 97 11 24 07AMERICAS:+15 04 303 5244E-mail: