Kongsberg Centering device (AHTS)

The centering device consist of a set of two arms which swings up and in towards each other. They are often combined in two sets The centering device consist of a set of two arms which swings up and in towards each other. They are often combined in two sets, each set mounted on the same centreline as the shark jaw, between one and two metres in front of it. To assist in moving tugger wires to come within the grasping range of the shark jaw, eliminating the need for personnel to enter exposed deck. It can also move large chain and wire under low tension. To hold and control chain and wire from dangerous spinning when slackened off after mooring line is disconnected from the shark jaw. Operation of towing pins, centring device and shark jaw is remote controlled from the bridge reducing risk to deck crew by avoiding work on unsecured heavily loaded chains or wires. A portable remote control is available for use during service and maintenance work. Get expert help anytime, anywhere—our global support team is available 24/7 to assist you. Upgrade your systems with tailored retrofit solutions to extend vessel life and boost performance. Explore our training programs to build skills, ensure safety, and maximize operational efficiency. Our Global Customer Support works 24/7 to provide prompt responses, technical expertise and global assistance from key locations in 32 countries. EMEA:+47 33 03 24 07APAC:+65 97 11 24 07AMERICAS:+15 04 303 5244E-mail: