"> MacGregor MacGregor MacPiler Fully Electric Gantry Crane
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 15 verified suppliers & service companies for MacGregor in the Maritime Network Find suppliers →
MacGregor

MacGregor MacPiler Fully Electric Gantry Crane

The MacGregor MacPiler is a fully electric gantry crane engineered for efficient, oil-free hatch cover operations on small cargo vessels. It replaces traditional hydraulics with a quiet, low-maintenance electric drive, reducing emissions and ensuring smooth, precise performance in all conditions.Built on MacGregor’s sustainable design expertise, the solution enables your crew to handle hatch covers safely, reliably, and efficiently.

MacGregor MacGregor MacPiler Fully Electric Gantry Crane

Components & Design

Component data being added…

Technical Data

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Drahtseilverschleiß und Beschädigungen

Visuelle Kontrolle auf Brüche, Verformungen, Korrosion; DNV 5-Jahres-Regel: Proben entnehmen + Labor-Test; Jährliche Inspektion der gesamten Länge bei Schadensanzeichen → ggf. Austausch erforderlich

Drehkranz-Lager-Verschleiß und Fettmangel

Rocking-Test (axiales Spiel messen); Sichtprüfung: Fettspuren unter dem Lager (trocken = Verschleiß-Risiko); Fettproben entnehmen für Ferrographie-Analyse (Verschleißpartikelkontrolle: Lamellenteilchen = Lagerschaden)

Hydraulik-Verschleiß und Leckagen

Sichtprüfung auf Ölaustritt an Ventilen, Zylindern, Schläuchen; Hydraulik-Ölproben für Analyse (Wassergehalt, Verschleißmetalle); Drucktest und Steuerventil-Funktionsprüfung; OnWatch Scout IoT-Condition-Monitoring optional verfügbar

Haken, Augen und Pin-Verbindungen

Oberflächenrisse und Verformungen (visuelle Kontrolle); Zugprobe nach UNE-EN ISO 6892-1:2010; 'Safety-Related'-Komponenten: hohe Inspektionsstufe vor Inbetriebnahme und während Lebensdauer

Lasttest und SWL-Prüfung

Alle 5 Jahre Lasttest erforderlich (DNV-Anforderung); Proof-Load-Test: max. 110% der Maximallast (OSHA/ASME B30.2.0-1967); Funktionsprüfung aller Positionen unter Wasser/Kalibriergewichten; DNV-Surveyor anwesend

Steuersysteme und Sicherheitsschalter

Endschalter (Heben/Senken Grenzen); Überlaststoppfunktion; Druckregelventile (Druckprobe); Redundanz-Prüfung der Bremsen

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #64294 · ✓ still in production