OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Request a part
Library› Deck› Yacht & Boat Equipment› Yacht/Boat DNV-Approved (Review)› JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI Model 3M
JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI

Model 3M

Yacht/Boat DNV-Approved (Review) · Yacht & Boat Equipment

Class-certified type (DNV register) · technical data sheet not yet verified

Model 3M by JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI. DNV RCD certificate RCDA100001RY.

Related models

Also in Yacht/Boat DNV-Approved (Review).

Other models of the same equipment type.

"Mirage Boats" Zajac & Bychto Sp. j.
STING 530
A.W. Niemeyer GmbH
AWN-260E
AB OQS-Ocean Quality Systems OY
Ocean Explorer 72
AB OQS-Ocean Quality Systems OY Ocean Explorer OE60
AB OQS-Ocean Quality Systems OY
Ocean Explorer OE60
AB Volvo Penta
Azimut 68
AB Volvo Penta
Certificate RCDB000001H
AB Volvo Penta
Certificate RCDB000001K
AB Volvo Penta
Certificate RCDB000001M
ABC Plovila d.o.o. Murterino 23
ABC Plovila d.o.o.
Murterino 23
AD Brodovi d.o.o.
Salona 35
Inspection

Inspector Detail

Common issues

  • Gelcoat crazing or osmotic blistering on GRP hulls from prolonged water immersion
  • Corrosion of metal fittings, fasteners and steering/control linkages in the marine environment
  • Wear or stiffening of steering cable or hydraulic steering components from lack of lubrication
  • Deterioration of rubber seals (hull-deck joint, hatches, through-hull fittings) leading to water ingress
  • Battery and electrical connection corrosion from a damp bilge environment
  • Safety equipment (life jackets, flares, fire extinguishers) reaching expiry without renewal
  • Fuel system degradation - hose hardening or tank corrosion - on craft with permanently installed tanks

Inspection checklist

  • Confirm the RCD/CE plate and certificate details match the craft's actual configuration
  • Check the hull for cracks, blistering or impact damage above and below the waterline
  • Verify all safety equipment (flares, life jackets, fire extinguisher, bilge pump/alarm) is in date and functional
  • Check the steering and control system for play, corrosion or fluid leaks
  • Inspect through-hull fittings and seacocks for corrosion and correct operation
  • Check bilge pump/bilge alarm function
  • Verify the fuel system for leaks, secure hose clamps and correct tank venting
  • Check navigation lights and electrical wiring for corrosion or insulation damage

Service intervals

Safety equipment date check (flares, extinguisher, life jackets)at least annually
Hull/gelcoat condition checkannually or at haul-out
Steering system inspection/lubricationper the installed system's own schedule, typically annually
Battery and electrical connection checkannually
Antifouling renewal, if applicableper local water conditions, commonly annually to every 2 years

Critical spares

  • Bilge pump unit
  • Steering cable, or hydraulic steering hose/ram matched to the installed system
  • Through-hull fitting/seacock in the correct size and material for the hull
  • Safety equipment (flares, extinguisher, life jackets) - renew on expiry rather than repair
  • Navigation light units

Safety

  • Confirm the craft's RCD design category matches the actual sea area of intended operation - operating beyond the certified category is a safety risk
  • Fuel system integrity (leaks, ventilation) is critical on craft with inboard/outboard tanks, to avoid explosion risk
  • Life-saving equipment must be in date and correctly stowed and accessible
  • Electrical faults in a damp bilge environment present fire and shock risk if not properly protected

Class survey

This is a small craft covered under the EU Recreational Craft Directive rather than full classification; verify the DNV RCD certificate (RCDA100001RY) remains current and matches the craft's actual configuration and equipment fit before relying on it for compliance.

Classification

DNV type approval

Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.

CertificateRCDA100001RY
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläSEIMIABB MarineMacGregorNovenco MarineHanla IMSDESMICarrier MarineGS-HydroAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Model 3M
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI Model 3M — a part, a service call, a second opinion. Are you JOVAN MAJOROS PR IZRADA CAMACA ZA SPORT I RAZONODU MAJORPLAST GOSPODJINCI? Claim this brand page.

Request a part for this modelRequest service

Service engineer? Write the day report for this Model 3M in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.