Certificate RCDP000007X
Certificate RCDP000007X by Martin Haake, Boot Bremen. DNV RCD certificate RCDP000007X.
Inspector Detail
▸
Common issues
- This catalog record identifies only an RCD certificate number and a boat builder, with no identifiable equipment type, make/model, or technical specification to assess
- Where present, recreational craft builder's plates and CE/RCD marking should be legible and match the vessel's technical file
- Design category (A/B/C/D) stated on the certificate not matching the craft's actual sea area of operation
- Post-construction assessment or equivalence route not clearly documented where the standard harmonised-standard build route was not used
- Hull/craft identification number (CIN) not matching the number quoted on the certificate
- Declaration of Conformity referencing superseded or withdrawn harmonised standards
Inspection checklist
- Confirm the RCD certificate/Declaration of Conformity documentation is on board and matches the builder's plate
- Confirm the design category (A/B/C/D) matches the vessel's actual operating area
- Cross-check the hull/craft identification number (CIN) against the certificate
- Confirm the notified body reference is present and traceable, where a category A/B or post-construction assessment applies
- Confirm the owner's manual referenced by the certificate is available on board
- Confirm the builder's plate is legible and permanently fixed
Service intervals
| Documentation/certificate validity check | at each ownership transfer or periodic compliance review |
Critical spares
- Copy of the RCD Declaration of Conformity (DoC)
- Copy of the builder's technical file, or its post-construction assessment equivalent
- Owner's manual as referenced by the certificate
- Builder's plate / CIN marking, for replacement if damaged or missing
- Notified body assessment report, where applicable
Safety
- Insufficient product data in this catalog record to identify specific hazards - do not rely on this entry for safety guidance until the actual equipment/vessel type is identified
- Without positive equipment identification, do not assume compliance with any specific fire, lifesaving, or stability requirement based on this record alone
- A design-category mismatch between the certificate and the craft's actual operating area is a safety-relevant discrepancy, not merely a paperwork issue
Class survey
This record appears to be a builder/RCD certificate reference (Martin Haake, Boot Bremen) rather than an identifiable equipment model - there is not enough data here for a genuine technical deep-dive, and inventing detail would be unsafe. The items above are general RCD/recreational-craft compliance points, not specifics about this record's actual product. Flagged for catalog data-quality review; recommend re-sourcing against the actual RCD certificate register entry for RCDP000007X before publishing further content on this record.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →DNV type approval
Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.
- Certificate
- RCDP000007X
- Approved as
- Recreational Craft
- Certificate holder
- Martin Haake, Boot Bremen (Germany)
- Valid until
- 2074-06-11