"> Tyne & Wear Marine TW Pilot Ladder 15m
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Tyne & Wear Marine in the Maritime Network Find suppliers →
Tyne & Wear Marine

TW Pilot Ladder 15m

The TW Pilot Ladder 15m is a SOLAS‑V compliant access ladder designed by Tyne & Wear Marine for safe pilot transfer, featuring a 15 metre length and spreader steps. The supplied category identifies the equipment as Pilot Ladder, and it is normally installed at an accommodation, embarkation, offshore transfer or aviation access area of the vessel. In that listed role, its primary purpose is to provide a controlled and structurally supported route or platform for personnel movement. Accommodation ladders, gangways, pilot ladders, personnel baskets and helidecks differ in movement and load path, but all require secure structure, safe access surfaces and documented operating limits. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 15m, SOLAS Ch. V. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Tyne & Wear Marine TW Pilot Ladder 15m
15m, SOLAS Ch. V
Capacity
Crew Accommodation
Medium

Components & Design

Component data being added…

Technical Data

length m 15
compliance SOLAS_V

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Corrosion, cracked welds or structural damage causes visible deterioration and unsafe load transfer
Hydraulic, winch or electric-drive faults on powered access equipment cause failed deployment or uncontrolled movement
Pins, hinges, rollers or suspension components wear and cause excessive play, binding or abnormal noise
Handrails, steps, nets, wires or anti-slip surfaces deteriorate and create a personnel-fall hazard
Limit switches, locking devices or control faults cause incomplete securing or unreliable indication

Service & Maintenance

Inspect structural members, foundations, hinges or suspension points, handrails, access surfaces, drives and safety devices according to the equipment type. Review certification and load-test records where applicable and check corrosion after exposed service. Verify secure stowage before sailing. Refer to manufacturer and class documentation for the exact figure for loads, angles and wear criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry approved pins, bushes, rollers, hydraulic seals or hoses where applicable, limit switches, securing hardware, anti-slip repair material and equipment-specific fasteners.
Equipment Model #573 · ✓ still in production