OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Request a part
Library› Electrical› Marine Cables & Wiring› General Marine Cables› TMC Co., Ltd 0.6/1 kV RU P111, FX-RU P111, RU, FX-RU
TMC Co., Ltd

0.6/1 kV RU P111, FX-RU P111, RU, FX-RU

General Marine Cables · Marine Cables & Wiring

Class-certified type (DNV register) · technical data sheet not yet verified

0.6/1 kV RU P111, FX-RU P111, RU, FX-RU by TMC Co., Ltd. DNV TA certificate TAE00002D4.

Related models

Also in General Marine Cables.

Other models of the same equipment type, TMC Co., Ltd first.

TMC Co., Ltd (FX-)BI, (FX-)BI(c)
TMC Co., Ltd
(FX-)BI, (FX-)BI(c)
TMC Co., Ltd (FX-)BI, (FX-)BI(c), (FX-)BI(i), (FX-)BI(i&c)
TMC Co., Ltd
(FX-)BI, (FX-)BI(c), (FX-)BI(i), (FX-)BI(i&c)
TMC Co., Ltd (FX-)BIOI, (FX-)BICI, (FX-)BIOI(c), (FX-)BICI(c), (FX-)BIOI(VFD)
TMC Co., Ltd
(FX-)BIOI, (FX-)BICI, (FX-)BIOI(c), (FX-)BICI(c), (FX-)BIOI(VFD)
TMC Co., Ltd (FX-)BIOI, (FX-)BIOI(c), (FX-)BIOI(i), (FX-)BIOI(i&c), (FX-)BICI, (FX-)BICI(c), (FX-)BICI(i), (FX-)BICI(i&c)
TMC Co., Ltd
(FX-)BIOI, (FX-)BIOI(c), (FX-)BIOI(i), (FX-)BIOI(i&c), (FX-)BICI, (FX-)BICI(c), (FX-)BICI(i), (FX-)BICI(i&c)
TMC Co., Ltd (FX-)BUOU & (FX-)BUBU & (FX-)BUCU 0.6/1 kV, (FX-)BUOU(c) & (FX-)BUBU(c) & (FX-)BUCU(c) 0.6/1 kV, (FX-)BUOU(VFD) & (FX-)BUBU(VFD) 0.6/1 kV (1.8/3 kV), (FX-)BUOU(VFD) & (FX-)BUBU(VFD) 1.8/3 kV
TMC Co., Ltd
(FX-)BUOU & (FX-)BUBU & (FX-)BUCU 0.6/1 kV, (FX-)BUOU(c) & (FX-)BUBU(c) & (FX-)BUCU(c) 0.6/1 kV, (FX-)BUOU(VFD) & (FX-)BUBU(VFD) 0.6/1 kV (1.8/3 kV), (FX-)BUOU(VFD) & (FX-)BUBU(VFD) 1.8/3 kV
TMC Co., Ltd (FX-)BUOU(i) & (FX-)BUOU(c) & (FX-)BUOU(i&c) 250 V, (FX-)BUBU(i) & (FX-)BUBU(c) & (FX-)BUBU(i&c) 250 V, (FX-)BUCU(i) & (FX-)BUCU(c) & (FX-)BUCU(i&c) 250 V, (FX-)BUOU & (FX-)BUBU & (FX-)BUCU 250 V
TMC Co., Ltd
(FX-)BUOU(i) & (FX-)BUOU(c) & (FX-)BUOU(i&c) 250 V, (FX-)BUBU(i) & (FX-)BUBU(c) & (FX-)BUBU(i&c) 250 V, (FX-)BUCU(i) & (FX-)BUCU(c) & (FX-)BUCU(i&c) 250 V, (FX-)BUOU & (FX-)BUBU & (FX-)BUCU 250 V
TMC Co., Ltd (FX-)RUOU & (FX-)RUBU & (FX-)RUCU & (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 3.6/6 kV & 6/10 kV & 8.7/15 kV & 18/30 kV
TMC Co., Ltd
(FX-)RUOU & (FX-)RUBU & (FX-)RUCU & (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 3.6/6 kV & 6/10 kV & 8.7/15 kV & 18/30 kV
TMC Co., Ltd (FX-)RUOU & (FX-)RUBU & (FX-)RUCU 0.6/1 kV, (FX-)RUOU(c) & (FX-)RUBU(c) & (FX-)RUCU(c) 0.6/1 kV, RUOU(VFD) & RUBU(VFD) 0.6/1 kV, (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 0.6/1 kV (1.8/3 kV), (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 1.8/3 kV, (FX-)RUOU & (FX-)RUBU & (FX-)RUCU 1.8/3 kV
TMC Co., Ltd
(FX-)RUOU & (FX-)RUBU & (FX-)RUCU 0.6/1 kV, (FX-)RUOU(c) & (FX-)RUBU(c) & (FX-)RUCU(c) 0.6/1 kV, RUOU(VFD) & RUBU(VFD) 0.6/1 kV, (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 0.6/1 kV (1.8/3 kV), (FX-)RUOU(VFD) & (FX-)RUBU(VFD) 1.8/3 kV, (FX-)RUOU & (FX-)RUBU & (FX-)RUCU 1.8/3 kV
TMC Co., Ltd (FX-)RUOU(i) & (FX-)RUOU(c) & (FX-)RUOU(i&c) 250 V, (FX-)RUBU(i) & (FX-)RUBU(c) & (FX-)RUBU(i&c) 250 V, (FX-)RUCU(i) & (FX-)RUCU(c) & (FX-)RUCU(i&c) 250 V, (FX-)RUOU & (FX-)RUBU & (FX-)RUCU 250 V
TMC Co., Ltd
(FX-)RUOU(i) & (FX-)RUOU(c) & (FX-)RUOU(i&c) 250 V, (FX-)RUBU(i) & (FX-)RUBU(c) & (FX-)RUBU(i&c) 250 V, (FX-)RUCU(i) & (FX-)RUCU(c) & (FX-)RUCU(i&c) 250 V, (FX-)RUOU & (FX-)RUBU & (FX-)RUCU 250 V
TMC Co., Ltd (FX-)TI, (FX-)TI(c)
TMC Co., Ltd
(FX-)TI, (FX-)TI(c)
Inspection

Inspector Detail

Common issues

  • Insulation degradation from prolonged heat exposure near machinery or exhaust runs
  • Sheath abrasion where cables pass through unprotected clips or tight bends
  • Water ingress at glands on deck or exposed runs
  • Overheating at terminations from undersized or poorly torqued lugs
  • Armour/screen continuity loss affecting earthing and EMI performance

Inspection checklist

  • Visual inspection for sheath cracking, heat discolouration, or physical damage
  • Insulation resistance test between conductors and to earth/screen
  • Check gland tightness and weatherproofing on exposed runs
  • Verify the cable is correctly supported and not resting on hot surfaces or sharp edges
  • Confirm termination torque and lug condition
  • Check continuity of any screen/armour bonding

Service intervals

Insulation resistance testannually for essential/critical circuits, per survey cycle otherwise
Visual inspection of routing, glands and supportsevery 6-12 months

Typical wear limits

Insulation resistance, 0.6/1kV cableshould remain well above the applicable minimum (commonly quoted around 1 M-ohm as an absolute floor) - a declining trend across surveys matters more than a single reading

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Matching gland set for the cable diameter and construction
  • Compression/crimp lugs sized for the conductor
  • Repair length of the same cable type and rating

Safety

  • Damaged insulation on live circuits presents shock and fire risk
  • Cables routed near hot surfaces without adequate clearance or fire-retardant protection are a fire propagation risk
  • Verify isolation before disturbing terminations

Class survey

Class checks focus on correct cable type for the application (flame-retardant/low-smoke where required), correct sizing and protection coordination, secure support and segregation from other services, and insulation resistance test records for essential circuits.

Estimated lifetime: Marine power/control cables of flame-retardant construction of this type are typically designed for 20+ years in a properly protected installation; actual life depends heavily on heat exposure, UV, and mechanical protection

Classification

DNV type approval

Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.

CertificateTAE00002D4
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for TMC Co., Ltd equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All TMC Co., Ltd models More like 0.6/1 kV RU P111, FX-RU P111, RU, FX-RU
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this TMC Co., Ltd 0.6/1 kV RU P111, FX-RU P111, RU, FX-RU — a part, a service call, a second opinion. Are you TMC Co., Ltd? Claim this brand page.

Request a part for this modelRequest service

Service engineer? Write the day report for this 0.6/1 kV RU P111, FX-RU P111, RU, FX-RU in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.