OceanSphereENGINES
Library› Engine Room› Composite Materials & Resins› Sandwich Core Material› Baltek, Inc. BALTEK® SB - Series, BALTEK® SBC - Series
Baltek, Inc.

BALTEK® SB - Series, BALTEK® SBC - Series

Sandwich Core Material · Composite Materials & Resins

Class-certified type (DNV register) · technical data sheet not yet verified​​⁠​⁠‍‍‍‌⁠​‌‌‌‌⁠‌‌⁠⁠
Example image: Sandwich Core Material — not a photo of this model.

BALTEK® SB - Series, BALTEK® SBC - Series by Baltek, Inc. DNV TA certificate TAK000013V.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Density50 - 250 kg/m3
Inspection

Inspector Detail

Common issues

  • Hydraulic oil leakage past vane seals reducing rudder torque and response
  • Air entrainment in the hydraulic system causing spongy or delayed rudder response
  • Rudder angle transmitter misalignment causing a helm/rudder indication mismatch
  • Relief valve setting drift allowing overpressure or reduced torque at hard-over
  • Variable displacement pump wear reducing rudder speed below the required rate
  • Rotary vane housing/stator seal wear leading to internal leakage between chambers
  • Changeover/solenoid valve sticking, affecting main/auxiliary steering changeover

Inspection checklist

  • Function-test steering gear from full port to full starboard and confirm rudder movement within the required time
  • Check hydraulic oil level and condition (water/particulate contamination); sample if due
  • Test changeover between main and auxiliary steering systems
  • Verify the rudder angle indicator agrees with actual rudder position at several angles
  • Check relief valve settings and confirm no seal leakage at rudder hard-over (stall test per class procedure)
  • Inspect for external hydraulic leaks at the pump, pipework and rotary vane unit
  • Test emergency/local steering position operation and communication to the bridge
  • Check alarm functions (low oil level, hydraulic lock, phase failure)

Service intervals

Hydraulic oil sampling/analysisannually, or per maker schedule
Full function/stall test and rudder timing testbefore departure per routine checks, and at annual survey, per SOLAS/class requirement
Relief valve setting verificationat overhaul or per class survey interval
Rotary vane seal/gasket renewalat major overhaul; interval depends on running hours and oil condition - confirm against Baltek's manual

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Critical spares

  • Rotary vane seal/gasket kit
  • Relief valve or repair kit
  • Hydraulic pump seal kit
  • Rudder angle transmitter
  • Changeover/solenoid valve
  • Hydraulic oil of the correct maker-specified grade

Safety

  • Loss of steering is a critical casualty - never carry out maintenance on the operating steering gear at sea without confirming an available backup steering method
  • High-pressure hydraulic system - relieve pressure before opening any joint; pinhole leaks can cause a fluid injection injury
  • Rudder movement during testing - clear personnel from the tiller flat/rudder trunk and follow lockout procedure before manual barring or hands-on work
  • Confirm communication with the bridge before any function test that moves the rudder

Class survey

Steering gear is statutory equipment under SOLAS. Class requires documented steering gear testing before departure, periodic full-rudder-angle timing tests, and confirmation that both main and auxiliary steering systems - and their independent power supplies, where required - are operative at each periodical survey.

Estimated lifetime: Rotary vane steering gear units of this type typically remain in service 20-25+ years with periodic seal and hydraulic component renewal; the vane/stator housing itself is normally long-lived if internal corrosion and cavitation are controlled - confirm against Baltek's design life documentation for the SB/SBC series.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateTAK000013V
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Baltek, Inc. equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Sandwich Core Material.

Other models of the same equipment type.

By manufacturer DIAB InternationalAirexNMG EUROPE S.r.l.Maricell S.r.l.PyrotekAngeloni Group S.r.l.CORELITE ITALIA S.r.l.Baltek, Inc.Changzhou Tiansheng Composite Materials Co., Ltd.CMT Materials LLCDongying Ruizhi Composite Co., Ltd.Gurit Americas Inc.Materiales Estructurales Ligeros S.L.MEL COMPOSITES, S.L.SAS NIDAPLAST-HONEYCOMBSAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like BALTEK® SB - Series, BALTEK® SBC - Series
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Baltek, Inc. BALTEK® SB - Series, BALTEK® SBC - Series — a part, a service call, a second opinion. Are you Baltek, Inc.? Claim this brand page.

Service engineer? Write the day report for this BALTEK® SB - Series, BALTEK® SBC - Series in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.