"> THR Marine THR-CW100 Compact Windlass
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
THR Marine

THR-CW100 Compact Windlass

The THR‑CW100 is a compact electric windlass designed for yachts, delivering up to 100 kN pull with a 38 mm chain at 9 m/min, notable for its small footprint and DNV approval. The supplied category identifies the equipment as Boat DNV-Approved (Review), and it is normally installed at the location appropriate to its actual installed function, which is not established by the supplied category alone. In that listed role, its primary purpose is to perform the function documented for the actual manufacturer model once its identity and marine approval status have been verified. Because the source explicitly places this item in a quarantine/review category, it would be unsafe to infer a specific machinery type, performance rating or approval from the category alone. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 100 kN. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

100 kN
Capacity
Anchor Chain / Mooring Lines
Medium

Components & Design

Component data being added…

Technical Data

swl kn 100
chain diameter mm 38
speed m min 9
drive electric

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Incorrect equipment identification causes the wrong maintenance or spare-parts procedure to be applied
Missing or unverified approval documentation causes uncertainty during survey or vessel acceptance
Corrosion, loose mounting or damaged connections cause visible deterioration regardless of the equipment's final classification
Electrical or control defects cause failed operation or alarms if the item is powered
Missing manufacturer documentation prevents reliable confirmation of limits, service intervals or compatible spares

Service & Maintenance

First verify the exact manufacturer model, equipment function, installation location and applicable approval documentation. Then inspect mounting, connections, condition, controls and safety devices using the correct manual. Do not use inferred model-number meanings as technical data. Refer to the manufacturer documentation for the exact figure for all limits and ratings.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Do not define a model-specific onboard spare set until the equipment identity is confirmed; retain only clearly compatible consumables, fuses, seals or mounting hardware already documented for the installed unit.
Equipment Model #446 · ✓ still in production