General Interior Materials · Marine Interior & Construction Materials
The Brintons Carpets Ltd Ax718U is a woven Axminster carpet construction with integral felt backing intended for approved marine interior use. It is fitted as a finished floor covering in accommodation and public spaces rather than forming part of machinery or lifesaving equipment. Axminster construction locks the pile yarn into a woven backing, giving a durable textile surface suitable for areas with repeated foot traffic. The integral felt backing provides part of the installed carpet build-up and should not be replaced casually with a different backing when maintaining approval traceability. On ships, the fire-performance certification of the exact carpet construction is as important as colour and wear resistance. Adhesive, underlay and substrate preparation may also affect the installed floor system and must follow the vessel's approved interior specification. Replacement material should therefore match the certified product or an independently approved equivalent rather than only the visible pattern.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect high-traffic areas, seams, thresholds and transitions for wear, loose edges and trip hazards during accommodation rounds. Investigate moisture or staining to identify the underlying leak or cleaning issue before replacing the visible carpet. Cleaning methods and chemicals should follow the carpet manufacturer's guidance so that backing and fire-performance characteristics are not unintentionally damaged. During refit, verify that replacement rolls or patches retain the required marine approval and that the installed backing and adhesive system are compatible. Any fire-test limitations or installation conditions should be taken from the certificate and Brintons documentation.
| General condition inspection | at each interior/accommodation survey |
|---|---|
| Replacement | wear-driven rather than a fixed schedule, typically several years depending on traffic |
| Re-certification | required whenever the carpet is replaced with new material |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
Interior linings and floor coverings are checked against the FTP Code (surface flammability, smoke and toxicity) at fire safety survey; any replacement material in accommodation spaces or escape routes must carry its own MED/wheelmark certificate for the same tested assembly (backing, adhesive, underlay) as originally approved - like-for-like substitution without re-certification is a common survey finding.
Carry matching approved carpet offcuts or spare roll material where the vessel has large installations and appearance continuity matters. Suitable seam materials, edge trims and the approved adhesive system can support small repairs. Label spare carpet with the product and approval reference so it is not confused with visually similar non-marine material.
Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.
Free of charge — send us your request for Brintons Carpets Ltd equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Brintons Carpets Ltd first.
Entries from public approval registers: number, body, status and validity as listed in the register at the retrieval date. The register itself is authoritative.
| Product | Type | Number | Body | Status | valid until |
|---|---|---|---|---|---|
| Woven Axminster Carpet Ax718U with Integral felt backing | Surface materials and floor coverings with low flame-spread characteristics: floor coverings | MERD000022X-1 | UK Approved Body 97 | Revised | 2029-01-03 |
| Woven Axminster Carpet Ax718U with Integral felt backing | Surface materials and floor coverings with low flame-spread characteristics: floor coverings | MERB00007M8-0 | UK Approved Body 97 | New | 2026-09-19 |
Tell us what you need for this Brintons Carpets Ltd Woven Axminster Carpet Ax718U with Integral felt backing — a part, a service call, a second opinion. Are you Brintons Carpets Ltd? Claim this brand page.
Service engineer? Write the day report for this Woven Axminster Carpet Ax718U with Integral felt backing in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.