OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› HVAC› Ventilation› Fire/Smoke Damper› Jiangsu Hongyu Marine Equipment Limited Company Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF
Jiangsu Hongyu Marine Equipment Limited Company

Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF

Fire/Smoke Damper · Ventilation

Class-certified type (DNV register) · technical data sheet not yet verified

Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF by Jiangsu Hongyu Marine Equipment Limited Company. DNV MED certificate MEDB000021C.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

IMO ApprovedYes
Inspection

Inspector Detail

Common issues

  • Fail-safe release or closing mechanism seizure from corrosion or contamination, preventing full closure
  • Blade or frame corrosion from weather exposure on deck, affecting tightness and fire integrity
  • Damaged or hardened seals and gaskets allowing gaps when closed
  • Linkage, spring or actuator wear causing slow or incomplete closing
  • Painting over moving parts or markings during maintenance, impairing function
  • Damper blocked open by debris, lashings or stowed items

Inspection checklist

  • Function-test closing from each remote and local control position
  • Confirm the damper closes fully and the indicator shows the true position
  • Inspect blade, frame, seals and fasteners for corrosion and damage
  • Check that the fail-safe mechanism operates without manual help
  • Verify that insulation and fire-rated components remain intact and undamaged
  • Check that identification plate and markings are legible and match the approval
  • Confirm unobstructed access and clearance around the damper
  • Review the ship's fire control plan against the installed damper positions

Service intervals

Closing function testtypically at each periodic fire safety inspection, commonly annual
Visual inspection of blade and frametypically annual or at each survey
Lubrication of moving partsper the maker's schedule, using approved lubricant
Seal and gasket condition checkannual or after any repair
Release mechanism test after maintenancebefore returning the damper to service

Typical wear limits

Blade-to-frame gap when closedmust stay within the clearance stated in the approved drawing - confirm against the maker's documentation
Seal conditionrenew when hardened, torn or missing
Corrosion of blade and framerepair or renew where section loss affects integrity or movement

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Matching seals or gaskets
  • Release or fail-safe mechanism components
  • Springs and linkage parts
  • Fusible element or release device where fitted
  • Fasteners and hardware matching the approved design
  • Indicator or limit switch parts where fitted

Safety

  • A damper that fails to close allows fire and smoke to spread through ventilation ducts
  • Do not paint, wedge or block the blade or release mechanism
  • Spring-loaded parts can release suddenly - secure before servicing
  • Hot work near the damper must not damage seals or insulation

Class survey

Held under DNV MED certificate MEDB000021C as an IMO-approved fire damper. Surveyors typically confirm that dampers close reliably, that markings match the approval and that the fire control plan agrees with the installation; function-test records are commonly requested.

Estimated lifetime: Not applicable in running hours; a passive fire protection item inspected for condition and function, expected to last for the vessel's service life when maintained.

Classification

DNV type approval

Verified against the DNV Approval Finder — the certificate below is issued by DNV, not by us.

CertificateMEDB000021C
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Jiangsu Hongyu Marine Equipment Limited Company equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Fire/Smoke Damper.

Other models of the same equipment type, Jiangsu Hongyu Marine Equipment Limited Company first.

By manufacturer EUROPAIRSwegon Air Management LimitedBarclayHalton MarineHi Air Korea Co., Ltd.Taizhou Hujiang Special Equipment Co., Ltd.Wozair LimitedChangshu Haixin Ship Machinery Manufacture Co., Ltd.Taicang Paien Ocean Equipment Sci-tech Co., Ltd.Taixing City Ocean Machinery Manufacture Co., Ltd.Taixing Hualong Shipping Machinery Co., Ltd.Jiangsu Josun Air Conditioner Co., Ltd.Jiangsu Sanxian Shipping Equipment Co., Ltd.Halton Wales (MEI) LtdKongsberg MaritimeAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Jiangsu Hongyu Marine Equipment Limited Company Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF — a part, a service call, a second opinion. Are you Jiangsu Hongyu Marine Equipment Limited Company? Claim this brand page.

Service engineer? Write the day report for this Automatic Fail-Safe Marine Fire Damper (Deck): HYSF, HYDF and HYQF in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.