OceanSphereENGINES
Library› HVAC› Marine Interior & Construction Materials› Fire Division Penetration Seal (Class A/B)› Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd Pipe penetration through "A" class bulkheads and decks
Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd

Pipe penetration through "A" class bulkheads and decks

Fire Division Penetration Seal (Class A/B) · Marine Interior & Construction Materials

Class-certified type (DNV register) · technical data sheet not yet verified​​‍‍‌‍​‍⁠‌⁠‍⁠‍‍​⁠​‌‍

Pipe penetration through "A" class bulkheads and decks by Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd. DNV MED certificate MEDB000023E.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

IMO ApprovedYes
Inspection

Inspector Detail

Common issues

  • Incorrect or insufficient annular gap fill/intumescent material at installation
  • Seal displaced or damaged during later pipe or cable work by other trades
  • Incompatible pipe material or diameter not matching the tested/approved configuration
  • Sealant or sleeve material ageing and shrinking over time
  • Missing certification label or marking at the penetration
  • Additional unauthorised penetrations made nearby, weakening the boundary

Inspection checklist

  • Visual condition of the seal material at each penetration
  • No visible gap or daylight around the pipe
  • Sealant/sleeve firmly bonded to both the pipe and the bulkhead/deck opening
  • Pipe type and size matches the tested/approved configuration
  • Penetration documented on the structural fire protection/fire zone drawing
  • No unauthorised additional penetrations nearby
  • Certification marking present and legible

Service intervals

Visual condition checkat each periodic structural fire protection inspection, typically annually
Full boundary/documentation auditat renewal survey
Re-check after any nearby pipework or cable modificationimmediately following the work
Certification marking legibility checkat each periodic fire safety inspection

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Gap between pipe and seal materialshould show no visible gap - any gap indicates the seal has failed and needs reinstatement per the approved installation method
Sealant conditioncracking, shrinkage, or separation from the pipe or structure should be assessed against the type approval installation instructions before the boundary is accepted
Overlap/embedment depth of the seal systemshould match the depth specified in the approved installation drawing - confirm against certificate MEDB000023E

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Matching type-approved penetration seal kit, by certificate reference
  • Intumescent sealing material of the approved type
  • Mounting/sleeve hardware matching the approved installation
  • Certification/identification label for reinstatement
  • Backing/packing material matching the approved system

Safety

  • An improperly sealed or damaged penetration compromises the "A" class fire and smoke boundary between compartments
  • Any modification must be re-certified/approved, not field-improvised
  • Loss of boundary integrity here directly undermines the fire zone subdivision relied on for escape and firefighting

Class survey

Note: this catalog entry is filed under 'Fire Hoses & Nozzles' but the product is a fire-rated pipe penetration seal for 'A' class bulkheads/decks (MED certificate MEDB000023E), not a hose - the content above addresses the actual product. Class surveyors check structural fire protection at each penetration against the approved drawings and the MED certificate during SOLAS II-2 related surveys.

Estimated lifetime: Not applicable in running hours; passive fire penetration seals are inspected for physical integrity for the life of the installation, provided they remain undamaged and unmodified.

Classification

DNV type approval

Listed in the DNV Approval Finder at the time we recorded it. The certificate is issued by DNV, not by us; check its current status at DNV.

CertificateMEDB000023E
Open the certificate at DNV
Need this part?

Request a quote for this model.

Free of charge — send us your request for Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Fire Division Penetration Seal (Class A/B).

Other models of the same equipment type, Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd first.

By manufacturer MCT Brattberg ABRoxtecACO MarineSpecified TechnologiesShanghai Huoke New Material Co., Ltd.Shaoxing Lianyi Machinery & Electricity Manufacture Co., Ltd.Remitite Co., Ltd.Firesafe Energy ASBLÜCHER MetalShanghai Yibo Shipping Co., LtdFireSeal ABShanghai Siaco New Materials Technology Co., Ltd.HAWKE TRANSIT SYSTEM, S.L.Shanghai Fan You Sealing Technology Co., LtdAIK Flammadur BrandschutzAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner More like Pipe penetration through "A" class bulkheads and decks
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd Pipe penetration through "A" class bulkheads and decks — a part, a service call, a second opinion. Are you Jingjiang Haihong Plastics & Rubbers Science-Technology Co., Ltd? Claim this brand page.

Service engineer? Write the day report for this Pipe penetration through "A" class bulkheads and decks in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.