⚓ Working on this equipment?

Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.

Start free — 14 days →

No credit card required

Is SURVITEC Fire Solution Poland Sp. z o.o. your company? Claim this page

SURVITEC Fire Solution Poland Sp. z o.o.

Foam/Water Monitors Type: UFM-80M, UFM-100M, UFM-150M, UFM-80H, UFM-100H

Name: SURVITEC Fire Solution Poland Sp. z o.o. Foam/Water Monitors Type: UFM-80M, UFM-100M, UFM-150M, UFM-80H, UFM-100H
Brand: SURVITEC Fire Solution Poland Sp. z o.o.
SKU: OSE-42300

Foam/Water Monitors Type: UFM-80M, UFM-100M, UFM-150M, UFM-80H, UFM-100H by SURVITEC Fire Solution Poland Sp. z o.o.. DNV MED certificate MEDB0000184.

Inspector Detail

▸

Common issues

Nozzle/seat wear affecting spray pattern and shut-off tightness
Seized or stiff manual/remote operating mechanism from corrosion or lack of exercise
Packing/seal leakage at the swivel joints
Corrosion of the monitor body and mounting base in the exposed weather deck location
Foam concentrate induction/eductor fouling or incorrect proportioning
Remote control actuator failure on remote-operated monitors
Blocked strainer reducing flow

Inspection checklist

Function-test monitor rotation (horizontal/vertical) and nozzle pattern change (jet/spray)
Check free movement of all swivel joints
Visually check the body and base for corrosion or damage
Verify foam concentrate proportioning rate where applicable
Check remote control operation from the control station, if fitted
Check the strainer/inlet for blockage
Verify flow and pressure against the design rating
Check mounting bolts and deck penetration sealing
Confirm identification and coverage signage is in place

Service intervals

Function test	at weekly/monthly fire drill routine per the vessel's fire safety maintenance plan
Full flow test with foam concentrate	commonly annually, per maker/class requirement
Swivel joint lubrication	per maker's schedule
Remote actuator inspection	at annual fire safety survey

Critical spares

Nozzle assembly
Swivel joint seal/packing kit
Strainer element
Remote actuator seal kit (for remote-operated units)

Safety

High-momentum jet/spray discharge - secure the monitor and clear personnel from the discharge arc before testing
Foam concentrate is a slip hazard on deck
Pressurized firemain supply
Moving parts (rotation/elevation) can pinch fingers during manual or remote operation
Working at height at some monitor mounting locations

Class survey

This unit's marine equipment database category on this listing is recorded as an addressable fire detection panel, which does not match its description as a foam/water monitor - a mechanical discharge device, not detection electronics. Please verify and correct the category before publishing. Fixed foam/water monitors are part of the fire-fighting system reviewed at fire safety survey; class checks function testing records, foam concentrate proportioning performance, and that monitor coverage matches the approved fire control plan.

Estimated lifetime: As fixed fire-fighting deck equipment rather than continuously running machinery, service life is governed by corrosion condition and periodic function/flow testing rather than running hours; the maker's guidance and class/flag survey findings determine replacement timing.