"> Towimor (Poland) Tugger Winch Series
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for Towimor (Poland) in the Maritime Network Find suppliers →
Is Towimor (Poland) your company? Claim this page
Towimor (Poland)

Tugger Winch Series

Tugger Winch Series by Towimor (Poland) is a tugger winch intended for deck handling of wires, ropes and equipment. The supplied record lists Pull 5-50 kN. The machine typically combines a drum, gearbox or hydraulic transmission, brake system, drive motor and local/remote controls on a heavily reinforced deck foundation. For towing duty, brake performance, drum condition and control reliability are safety-critical because line loads can change rapidly with vessel motion; for tugger duty, controlled pull and safe handling remain the main concerns. Different series executions may vary in drum capacity, drive type, brake arrangement and control functions; those details are not defined in the supplied record. Operate and maintain the exact installed winch according to the maker manual, vessel towing or deck procedures and class-approved arrangement.

Pull 5-50 kN
Capacity
Wire Rope / Synthetic Line
Medium

Components & Design

Component data being added…

Technical Data

type Utility/Tugger Winch
variant count approx 4
period start year 1965
drive type Electric / Hydraulic
construction Compact steel, worm gear, band brake

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Brake wear, contamination or actuator deterioration, noticed as reduced holding control or abnormal brake travel
●Gearbox or bearing wear, noticed as noise, vibration, temperature increase or backlash
●Gear-housing or shaft-seal leakage, noticed as loss of lubricant around the drive
●Electric-motor moisture/insulation deterioration or hydraulic-drive contamination, noticed as trips, slow response or reduced torque
●Drum, wire/rope contact surface or level-wind damage where fitted, noticed as poor spooling or line damage
●Control, limit or emergency-stop malfunction, noticed during functional testing

Service & Maintenance

Inspect the drum, brake, gearbox, foundations, guards and controls before critical operations and under the planned-maintenance system. Trend gearbox condition, lubricant leakage, motor/hydraulic-drive performance and bearing temperatures where monitoring is provided. Function-test local/remote controls, emergency stop and brake response in a safe unloaded or controlled condition according to vessel procedure. Inspect the towing wire/rope and connected gear as a system, not just the winch. Class survey may include operational and brake tests, structural condition and safety controls depending on the approved towing arrangement. Use manufacturer documentation for exact brake torque, wear limits, test loads and overhaul intervals.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry brake friction components, seal/gasket kits, selected bearings, control switches/sensors and drive-specific spares appropriate to the installed execution. For hydraulic units, include critical valve/solenoid/seal items; for electric units, include relevant contactor/brake/control components. Major gearbox or drum components should be identified from the serial-number-specific drawings and planned according to supply risk.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Towimor (Poland)?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #37865 · ✓ still in production