"> Netzsch NM 038BY
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 3 verified suppliers & service companies for Netzsch in the Maritime Network Find suppliers →
Is Netzsch your company? Claim this page
Netzsch

NM 038BY

The Netzsch NM 038BY is a progressive‑cavity sludge pump designed for continuous handling of high‑solids, viscous liquids on board ships, with a self‑priming capability and low shear action. The supplied category identifies the equipment as Sludge Pump, and it is normally installed in the engine room, pump room, cargo area or auxiliary machinery space within the service defined by the vessel piping arrangement. In that listed role, its primary purpose is to transfer liquid for the duty identified by the listed system. Centrifugal, screw, self-priming, progressive-cavity and service-specific pumps differ in hydraulic principle, suction behaviour and permissible media, so the exact construction must be confirmed from the installed documentation. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states power: 1.5 kW; capacity: 2 m3/h. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

1.5 kW
Power
2 m3/h
Capacity
Sludge/Oil sludge
Medium

Components & Design

Component data being added…

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Poor suction conditions, blockage or air ingress cause low flow, cavitation-like noise or unstable discharge
●Seal, packing or gasket wear causes visible leakage and falling system pressure
●Bearing, shaft or coupling wear causes vibration, abnormal noise or rising temperature
●Impeller, screw or other pumping-element wear or fouling reduces capacity and may increase drive load
●Motor, hydraulic-drive, valve or control faults cause failure to start, reduced speed or protective trips

Service & Maintenance

Inspect suction condition, strainers, seals, bearings, coupling or drive, foundation, leakage and associated valves. Trend pressure, flow, vibration and drive load where available. Investigate cavitation, abnormal noise or recurring trips promptly. Refer to the manufacturer documentation for the exact figure for clearances, wear limits and pressure settings.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry seals or packing, bearings where appropriate, coupling parts, gaskets, filters and critical hydraulic or electrical control spares for the installed pump type.

Manuals

  • overview
    MAN 48/60 — Survey / Übersicht (A1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • operating
    MAN 48/60 — Operating Instructions (B1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • maintenance
    MAN 48/60 — Working Instructions (B2)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • spare_parts
    MAN 48/60 — Spare Parts Catalogue (B3)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • operating
    MAN 48/60 — Turbocharger Operating (C1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • maintenance
    MAN 48/60 — Turbocharger Working (C2)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • spare_parts
    MAN 48/60 — Turbocharger Spare Parts (C3)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • overview
    MAN 48/60 — A1 Übersicht (A1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • operating
    MAN 48/60 — Betriebsanweisung (B1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • maintenance
    MAN 48/60 — Arbeitsanweisungen (B2)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • spare_parts
    MAN 48/60 — Haupt-Ersatzteilkatalog (B3)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • operating
    MAN 48/60 — Turbo Betriebsanweisung (C1)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • maintenance
    MAN 48/60 — Turbo Arbeitsanweisungen (C2)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • spare_parts
    MAN 48/60 — Turbo Ersatzteilkatalog (C3)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • reference
    MAN 48/60 — Anzugsdrehmomente (000.30)
    Manufacturer document — reference only, not distributed here.
    MAN Energy Solutions
  • oem_manual
    MAN 9L48/60 A1 Survey
    MAN B&W
  • oem_manual
    MAN 9L48/60 B1 Operating Instructions
    MAN B&W
  • oem_manual
    MAN 9L48/60 B2 Working Instructions
    MAN B&W
  • oem_manual
    MAN 9L48/60 B3 Spare Parts Catalogue
    MAN B&W
  • oem_manual
    MAN 9L48/60 C1 Turbocharger Operating Instructions
    MAN B&W
  • oem_manual
    MAN 9L48/60 C2 Turbocharger Working Instructions
    MAN B&W
  • oem_manual
    MAN 9L48/60 C3 Turbocharger Spare Parts Catalogue
    MAN B&W
  • oem_manual
    MAN 9L48/60 A1 Uebersicht (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 B1 Betriebsanweisung (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 B2 Arbeitsanweisungen (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 B3 Haupt-Ersatzteilkatalog (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 C1 TC-Betriebsanweisung (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 C2 TC-Arbeitsanweisungen (DE)
    MAN B&W
  • oem_manual
    MAN 9L48/60 C3 TC-Ersatzteilkatalog (DE)
    MAN B&W
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Netzsch?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #286 · ✓ still in production