OceanSphereENGINES

FMP53 HART

Pressure/DP Transmitter · Cargo Level & Temperature Gauging

​⁠​‍​⁠​‍‌​‌‍​‌‌​‍⁠⁠​
Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Ta:22
LN =24
Mwp:6
Fw:18
Dev.rev.16
Date:14
Abstand (A) von Stabsonden zur Behälterwand> 50 mm (2 in)
Abstand (B) von Stabsonden zu Einbauten> 300 mm (12 in)
Mindestabstand zwischen den Sensorachsen100 mm (3,94 in)
Abstand (C) des Sondenendes vom Behälterboden> 10 mm (0,4 in)
Min. Biegeradius50 mm (2 inch)
Kabellänge3 m (9 ft) oder 6 m (18 ft)
Maximale WandstärkeKunststoff: < 15 mm (0,6 in), Glas: < 10 mm (0,4 in)
Durchmesser der metallischen Plattemindestens 200 mm (8 in)
Minimale Radius50 mm (2") mm / "
Überwurfmutter am gehäuseseitigen KabelendeGabelschlüssel SW18
Überwurfmutter am sondenseitigen KabelendeHakenschlüssel 54 mm und Gabelschlüssel 27 mm
Klemmenspannung U90 … 253 VAC (50 … 60 Hz)
Maximale Bürde Rmax500
Widerstand pro Kanal2 * 0,5 Ω max
Ansprechgleichspannung400…700 V
Ansprechstoßspannung< 800 V
Kapazität bei 1 MHz< 1,5 pF
Nennableitstoßstrom (8/20 μs)10 kA
Power supply; output Terminal voltage U90 to 253 VAC (50 to 60 Hz)
Power supply; output Maximum load Rmax500
Envelope curve50 kg/h
Bending radius50 mm
Mounting dimensions (A)122 (4.8)
Terminal voltage13.5 to 35 V
Maximum load R500
Minimum voltage for startup16 V
Terminal voltage U13.5 to 30 V
Output4-20mA HART
Maximum load Rmax500 Ω
Threshold DC voltage400 to 700 V
Threshold impulse voltage< 800 V
Capacitance at 1 MHz< 1.5 pF
Nominal arrest impulse voltage (8/20 μs)10 kA
Dimensions16 mm (in)
Drehmoment der Überwurfmutter am sensorseitigen Stecker20 Nm
Ø42...60 mm
Length52 mm
Width122 mm
Height127...140 mm
Depth70 mm
Befestigungsschraube1,5 Nm bei Kunststoffgehäuse; 2,5 Nm bei Alu- oder Edelstahlgehäuse
Drehung des Messumformergehäusesmax. 350°
Abstand zum Bodenrmin = 50 mm (2")
Versorgungsspannung11,5…35 V
Maximale Bürde500 [W]
Klemmenspannung U am Gerät13,5 … 35 V
Maximale Bürde R, abhängig von der Versorgungsspannung U0 des Speisegeräts500
Minimale Abmessung50 mm (2")
Max. Drehbewegung8 × 45°
Sicherungskralle Drehmoment2,5 Nm
Klemmspannung U am Gerät12…35 V
Maximale Bürde R500 W
Zulässige Restwelligkeit bei f = 100 ... 10000 HzUSS < 10 mV
Montageabstand A> 50 mm (2 in)
Montageabstand B> 300 mm (12 in)
Montageabstand C> 10 mm (0,4 in)
Mindestabstand zwischen Sensorachsen100 mm (3,94 in)
max. Drehwinkel350
Maximale Produktmasse18 kg (39.6 lbs)
Befestigungsschraube anziehen1,5 Nm bei Kunststoffgehäuse; 2,5 Nm bei Alu- oder Edelstahlgehäuse
max. Drehung350°
min. Abstand50 mm (2")
Sicherungskralle2,5 Nm
Mounting torque6 Nm (4.42 lbf ft)
Moment der Montage6 Nm (4.42 lbf ft)
Zulässige Restwelligkeit bei f = 0 ... 100 HzUSS < 1 V
Manufacturer documentation

Images from manufacturer documentation.

Photos, drawings and page previews from this model’s datasheet or catalog.

The Levelflex FMP53 HART is a level sensor used for measuring liquid levels in tanks and vessels.

Applications

  • liquid level measurement

Features

  • multiple sensor installation

Options

  • external surge protection module
Source: Endress+Hauser FMP53 HART datasheet, p. 46

Standards

  • DIN EN 60079-14
  • Prüfnorm 60060-1
Source: Endress+Hauser FMP53 HART datasheet, p. 46
Endress+Hauser FMP53 HART – Drawing (9fa88235c260_S20-176 S. 20)
Drawing · 9fa88235c260_S20-176 · S. 20
Endress+Hauser FMP53 HART – Drawing (9fa88235c260_S20-176 S. 21)
Drawing · 9fa88235c260_S20-176 · S. 21
Endress+Hauser FMP53 HART – Drawing (9fa88235c260_S20-176 S. 22)
Drawing · 9fa88235c260_S20-176 · S. 22
Endress+Hauser FMP53 HART – Page preview (9fa88235c260_S20-176 S. 23)
Page preview · 9fa88235c260_S20-176 · S. 23
Endress+Hauser FMP53 HART – Page preview (9fa88235c260_S20-176 S. 24)
Page preview · 9fa88235c260_S20-176 · S. 24
Endress+Hauser FMP53 HART – Page preview (9fa88235c260_S20-176 S. 25)
Page preview · 9fa88235c260_S20-176 · S. 25
Endress+Hauser FMP53 HART – Page preview (9fa88235c260_S20-176 S. 26)
Page preview · 9fa88235c260_S20-176 · S. 26
Source: Endress+Hauser FMP53 HART datasheet, p. 21
Need this part?

Request a quote for this model.

Free of charge — send us your request for Endress+Hauser equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Pressure/DP Transmitter.

Other models of the same equipment type, Endress+Hauser first.

By manufacturer Endress+HauserKeller DruckmesstechnikYokogawaEmersonEmerson RosemountAFRISOKlay InstrumentsHanla IMSVaisalaKongsbergBenderSiemens AG - Digital Industries - Process AutomationDuon SystemHydac ElectronicPSM InstrumentationAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Endress+Hauser models More like FMP53 HART
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Endress+Hauser FMP53 HART — a part, a service call, a second opinion. Are you Endress+Hauser? Claim this brand page.

Service engineer? Write the day report for this FMP53 HART in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.