OceanSphereENGINES

HART

Füllstandsschalter · Automation & Steuerung

​⁠​‌‌​‌​‍⁠​⁠⁠‍​‌⁠‌‌​
Technische Daten

Technische Daten.Referenz — nicht verifiziert

Haben Sie das Herstellerdatenblatt zu diesem Modell? Schicken Sie es mit dem Anfrageformular — wir prüfen es und nennen die Quelle.

Reference operating conditionsAmbient temperature: +23 °C (+73 °F)
Minimum distance between the tuning fork and the tank wall or pipe wall:10 mm (0.39 in)
Maximum measured errorAt reference operating conditions:
Plastic coating:–0.2 to –1.2 mm (–0.008 to –0.05 in)
Enamel coating:0 to 0.9 mm (0 to 0.04 in)
ResolutionCurrent output: < 1 µA
Terminal assignmentOUT 0.5A
Supply voltage12 to 30 VDC on a direct current power unit
Overvoltage protectionThe device satisfies the IEC/DIN EN 61326-1 product standard (Table 2 Industrial
Weight, housing including electronics and onsite display0.2 kg
Weight, process connection and antenna, MNPT/G ½, antenna 80 GHz; PTFE0.140 kg
Weight, process connection and antenna, MNPT/G ¾, antenna 80 GHz; PEEK0.195 kg
Weight, process connection and antenna, MNPT/G 1½, antenna 80 GHz; PEEK0.675 kg
Weight, process connection and antenna, G 1, antenna 80 GHz, PEEK0.260 kg
Weight, process connection and antenna, M24, antenna 80 GHz; PEEK0.155 kg
Weight, process connection and antenna, M24, antenna 180 GHz, PTFE0.180 kg
Weight, process connection and antenna, Tri-Clamp NA Connect ISO2852 DN25-38 (1½), antenna 80 GHz; PTFE0.320 kg
Weight, process connection and antenna, Tri-Clamp NA Connect ISO2852 DN40-51 (2), antenna 80 GHz; PTFE0.450 kg
Weight, process connection and antenna, NEUMO BioControl D50 PN16, antenna 80 GHz; PEEK0.890 kg
ZertifikateEN 302372
Reflectormetal plate with diameter ≥ 1 m (40 in)
Sum of non-linearity, non-repeatability and hysteresis:±2 mm (±0.08 in)
Offset/zero point:±4 mm (±0.16 in)
Output, analogOnly relevant for 4-20mA current output; add error of the analog value to the di
Measured value resolutionDead band as per EN61298-2:
Digital:1 mm (0.04 in)
Tank height<20 m (66 ft)
Power consumptionTo meet device safety specifications according to the IEC/EN 61010 standard, the
Reference conditions• Ambient temperature TA = constant, in the range of +21 to +33 °C (+70 to +91 °
HART communication resistor250 Ω
Terminal voltage90 to 253 VAC (50 to 60 Hz)
Rmax500 Ω
Terminal voltage U at Maximum load R, depending on the supply voltage U0 at the supply unit10.4 to 35 V 3) 4) 5)
Terminal voltage U16 to 30 V
Maximum load R, depending on the supply voltage U0 of the power supply unit500 W
Permitted residual ripple with f = 100 to 10000 HzUSS < 10 mV
Resistance per channel2 × 0.5 Ω max.
Threshold DC voltage400 to 700 V
Threshold impulse voltage< 800 V
Capacitance at 1 MHz< 1.5 pF
Nominal arrest impulse voltage (8/20 μs)10 kA
Nominal current4 to 20 mA
OberflächenrauheitRa ≤3,2 µm (126 µin)
Fehlerverhalten (gemäß NAMUR-Empfehlung NE 43): Minimaler Alarm (= Werkseinstellung)3,6 mA
Fehlerverhalten (gemäß NAMUR-Empfehlung NE 43): Maximaler Alarm22 mA
Fehlerverhalten (gemäß NAMUR-Empfehlung NE 43): Fehlerverhalten mit frei einstellbarem Wert3,59 … 22,5 mA
Bürde4 … 20 mA HART
R L max1065 [W]
RLmax maximaler Bürdenwiderstand3 R L max £ U – 10.5 V
Gewicht4,4 kg (9,7 lb)
WerkstoffStahl, 316Ti (1.4571)
Öffnungen für alle Anschlüsse Vordereite G 2" (MNPT 2")62 mm (2,44 in)
Öffnung kann für einen beliebigen zusätzlichen Sensor verwendet werden22 mm (0,87 in)
Minimum bending radius100 mm (4)
Abmessungen11 mm (in)
Cable entry10 (0.4) mm (in)
Ø42...601.65...2.36 mm
1224.8 mm
127...1405...5.51 mm
1616.34 mm
162...1756.38...6.89 mm
703.4 mm
862.8 mm
Herstellerunterlagen

Bilder aus Herstellerunterlagen.

Fotos, Zeichnungen und Seitenvorschauen aus dem Datenblatt oder Katalog dieses Modells.

The Micropilot FMR20 HART is a non-contact level sensor for measuring the level of liquids in vessels.

Einsatzbereiche

  • Level measurement in vessels

Merkmale

  • Blocking distance suppression
  • Automatic Blocking distance calculation
  • Nozzle installation for optimum measurement

Optionen

  • Various process connections
  • Different antenna options
Quelle: Endress+Hauser HART datasheet, S. 32

Normen

  • IEC 62828-2
  • IEC/EN 61010-1
  • IEC/DIN EN 61326-1
  • IEC/DIN EN 61000-4-5
Endress+Hauser HART – Zeichnung (a9651588eaff_S14-41 S. 15)
Zeichnung · a9651588eaff_S14-41 · S. 15
Endress+Hauser HART – Zeichnung (a9651588eaff_S14-41 S. 16)
Zeichnung · a9651588eaff_S14-41 · S. 16
Endress+Hauser HART – Zeichnung (a9651588eaff_S14-41 S. 17)
Zeichnung · a9651588eaff_S14-41 · S. 17
Endress+Hauser HART – Seitenvorschau (a9651588eaff_S14-41 S. 14)
Seitenvorschau · a9651588eaff_S14-41 · S. 14
Endress+Hauser HART – Seitenvorschau (a9651588eaff_S14-41 S. 18)
Seitenvorschau · a9651588eaff_S14-41 · S. 18
Endress+Hauser HART – Seitenvorschau (a9651588eaff_S14-41 S. 19)
Seitenvorschau · a9651588eaff_S14-41 · S. 19
Endress+Hauser HART – Seitenvorschau (a9651588eaff_S14-41 S. 20)
Seitenvorschau · a9651588eaff_S14-41 · S. 20
Quelle: Endress+Hauser HART datasheet, S. 15
Dieses Teil gesucht?

Angebot für dieses Modell anfragen.

Kostenlos — senden Sie uns Ihre Anfrage zu Endress+Hauser-Ausrüstung. Unser Team prüft sie und antwortet per E-Mail.

Für Schiffsausrüstung nennt kaum ein Hersteller oder Vertragshändler einen Preis, solange das Schiff unbekannt ist. Mit Schiffsangaben lässt sich Verfügbarkeit und Preis schneller klären; fehlen sie, müssen wir unter Umständen zuerst nachfragen, was einige Tage kostet. Dürfen Sie das Schiff nicht nennen, reicht ein Foto des Typenschilds — hängen Sie es unten an oder schicken Sie es als Antwort auf unsere Bestätigungsmail.

Ihre Kontaktdaten werden nicht veröffentlicht. Kein Konto nötig.
Verwandte Modelle

Auch in Füllstandsschalter.

Weitere Modelle desselben Ausrüstungstyps, zuerst Endress+Hauser.

Nach Hersteller Endress+HauserAFRISOTokyo KeisoKlay InstrumentsHanla IMSVEGA GrieshaberSetra SystemsEmersonGestraPSM InstrumentationSiemens AG - Digital Industries - Process AutomationAPI MarineKuk Dong LevelNakakita Seisakusho Co., Ltd.BEDIA Motorentechnik GmbH & Co.KGAlle HerstellerErsatzteile nach AusrüstungNeu hier? Kostenloses Konto anlegen Typenschild unleserlich? Probieren Sie den Typenschild-Scanner Alle Endress+Hauser-Modelle Ähnliche wie HART
Mehr als das Datenblatt zeigt

Wir antworten per E-Mail, nie mit einer Automatik.

Sagen Sie uns, was Sie für diesen Endress+Hauser HART benötigen — ein Ersatzteil, einen Serviceeinsatz, eine zweite Meinung. Sind Sie Endress+Hauser? Diese Herstellerseite beanspruchen.

Servicetechniker? Schreiben Sie den Tagesbericht für diesen HART in OceanSphere Work — Fotos, Stunden und Teile, als PDF für den Reeder. 14 Tage kostenlos testen →

Häufig gefragt

Fragen, die bei dieser Ausrüstung aufkommen.

Sind die Daten dieses Modells kostenfrei?

Ja. Technische Daten, Dokumente und Servicehinweise zu diesem Modell sind ohne Konto lesbar. Ein Konto bringt gespeicherte Suchen und Anfragen dazu, es nimmt nichts weg.

Können Sie ein Teil genau für dieses Modell finden?

Ja. Nennen Sie uns Hersteller, Modell und Bedarf — ein Mensch liest jede Anfrage und antwortet per E-Mail.

Die Angaben scheinen falsch zu sein — was jetzt?

Schicken Sie uns das Typenschild oder den richtigen Wert. Wir prüfen ihn gegen das Herstellerdatenblatt oder den Klassifikationsdatensatz und aktualisieren die Seite.