CertificationsISO 9001:2008
DESIGN TEMPERATURE RANGE:-46°C to 426°C (-50°F to 800°F)
Pressure Rating17 bar / 250 psi
Size04
Face to faceBS EN 558 ASME B16.10
Fire testingBS 6755 Pt. 2 API 607
Pressure testingBS ISO 5208 API 598
Material certificationBS EN 10204 NACE MR 0175-2002
Quality assuranceEN 29001
ISO top mounting flangeBS EN ISO 5211
Face to face standardASME B16.10/BS EN 558
Class150
NPS DN½ - 1½ 15 - 40
Temperature range-20°C and 300°C
Seat leakageBS ISO 5208 rate A
Dn15 - 50 mm
Coating thickness500 micron
Coating hardness60 HRc
Temp. limit450°C
Density2.50 x 103 kg.m-3
Coefficient of thermal expansion4.7 x 10-6 °C
Standard paint/finishSeries 200
Size range:DN 50 to DN 400
VACUUM RATING1.354 x 10-3 mbar (1.016 x 10-3 mm Hg)
ISO top mounting detailsBS EN 15081
FACE TO FACE STANDARDASME B16.10/BS EN 558 - CLASS 150
Max temperaturesHP probe: 1000°F (538°C)
Operating temperature:0 to 160°F (-17°C to 71°C)
Input voltage:24 VAC nominal, 50-60 Hz
Max. temperaturesHP probe: 1000°F (538°C)
LP probe: 525°F (274°C)
Maximum sensitivity:10μS/1MΩ - cm water
Operating temperature0°F to 160°F (-17°C to 71°C)
Input voltage120 VAC/240 VAC nominal
50-60 Hz 12 VA
Operating temperature (electronics):0 to 160°F (-17 to 71°C)
Pressure rating:DN 8 - 40 (NPS ¼ - 1½): 69 bar / PN 69 / 1000 psi DN 50 - 100 (NPS 2 - 4): 55 ba
Ød0.71 inch
Ød0.46 inch
Øk0.56 inch
Sd&sw2.32 inch
Bw2.06 inch
BW 100 mm9.25 inch
H11.46 inch
H22.44 inch
W4.41 inch
S0.33 inch
PcdøaF03Ø1.42
MastA276-316 SS
ΔP = psi1000
ΔP = bar69
Max. probe temperaturesHP probe: 1000°F (538°C)
Sizes1 x 2 in. to 10 x 14 in. (DN 25 x 50 to DN 250 x 350)
Orifices0.110 to 63.5 in2 (0.710 to 409.7 cm2)
Inlet ratingsANSI Class 150 to 600
Set pressures15 to 1480 psig (1.03 to 102 barg)
Up to7,600 psig (524 barg) on request
Sizes, In. (DN)1 to 10 in. (DN 25 to 250)
Pressure range, psig (barg)Up to 6170 psig (425 barg)
Temperature range, °F (°C)-423 to 800°F (-253 to 427°C)
ConnectionsANSI Class 150 to 2500
Max. pressuresHP probe: 3000 psig (207 barg)
EnclosureType 4X/IP66
Maximum sensitivity1μS/1MΩ - cm water
Operating temperature (electronics)0 to 160°F (-17°C to 71°C)
Trim A: Δp max.10 bar (145 psi)
Trim B: Δp max.25 bar (363 psi)
Trim C: Δp max.52 bar (754 psi)
Trim D: Δp max.110 bar (1595 psi)
Quality management systemISO 9001:2008
Environmental management systemISO 14001:2004
Health and safety management systemOHSAS 18001:2007
PerformanceSIL 3 capable
TestingAPI 609 and EN 593; ASME B16.34 and EN 12516
Size DN (NPS)50 (2) 125 (5) 300 (12) 500 (20)
Body style0 Wafer
Size of connection - NPS1/2, 3/4 , 1, 11/4, 11/2, 2, 21/2, 3, 4
Visibility4300: 10¼” to 69⅛” (260 to 1756 mm)
Pressure ratingTo 10 psi (0.7 bar)
Pressure rating: leak proof to10 psi (69.0 kPa)
Sizes:NPS ½ to 2
Main Valve Size2 x 3 (50 x 80) in. (DN)
Orifice Area2.93 (18.90) in2 (cm2)
Minimum Set Pressure10.00 (0.690) psig (barg)
Maximum Set Pressure150 (10.3) psig (barg)
Inlet sizeC ½ in. (12.7 mm) F 1¼ in. (31.8 mm) J[1] 2½ in.
Set pressure3 psig to 1400 psig (0.2 to 96.5 barg)
Vacuum 6 to 29 in. HG (200 to 1000 mbarg)
TemperatureMax. design 750°F (400°C)