Outboard Engine (Petrol/SI) · Shaft Line & Propulsion
American Honda Motor JHNXM1.502G1 is identified in the source list as a petrol spark-ignition outboard engine with a stated power of 75.0 kW. As an outboard propulsion unit, this equipment class combines the engine and marine drive in a stern-mounted package rather than locating the propulsion engine permanently inside the hull. It is normally installed at the transom or an equivalent stern mounting position, with the exact shaft length, steering arrangement, controls and mounting geometry depending on the vessel and engine variant. Its primary function is to provide propulsion and maneuvering thrust while keeping routine engine access concentrated at the stern of the craft. Within the neighboring entries in this dataset, this unit is distinguished by the exact manufacturer family or model code JHNXM1.502G1 and the stated 75.0 kW rating. The source does not provide displacement, cylinder arrangement, gear ratio, propeller specification, emissions calibration or service limits for this exact code, so those model-specific details must be confirmed from American Honda Motor documentation before parts selection, adjustment or overhaul work.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, American Honda Motor first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the mounting, steering and control linkages, fuel system, electrical connections, cooling-water path, propeller and gearcase before operation. Check for fuel or oil leakage, corrosion, damaged wiring, loose fasteners and evidence of overheating. Confirm that cooling-water inlets are clear and that the engine develops normal cooling flow after starting. Inspect the propeller and lower unit for impact damage, line entanglement and seal leakage, and examine sacrificial corrosion protection where fitted. Use the exact family or model code and serial identification when ordering parts or checking service data. Service intervals, lubricant specifications, adjustment values and wear limits must be taken from the manufacturer documentation for the exact engine variant.
Typical onboard support items for this equipment class include suitable spark plugs, fuel-filter elements, approved engine and gearcase lubricants, sealing washers, fuses, selected electrical consumables and water-pump service parts where applicable. For workboats or craft operating away from shore support, propeller hardware and a serviceable spare propeller may also be appropriate. Exact part numbers and compatibility must be verified against the engine serial number and manufacturer parts catalogue.
Free of charge — we forward your request to qualified suppliers for American Honda Motor equipment from our network of over 114,000 maritime companies.
Tell us what you need for this American Honda Motor JHNXM1.502G1 — a part, a service call, a second opinion. Are you American Honda Motor? Claim this brand page.
Service engineer? Write the day report for this JHNXM1.502G1 in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.