Sterndrive / Inboard Engine (Petrol/SI) · Shaft Line & Propulsion
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Ilmor Engineering first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect the engine compartment for fuel vapor, fuel or oil leakage, cooling-water leakage, exhaust leakage, poor ventilation, loose wiring, overheated terminals, and evidence of previous flooding or seawater exposure. Check raw-water and closed-circuit cooling components as fitted, including strainers, pumps, hoses, clamps, heat exchangers, thermostatic components, and accessible manifolds or passages for restriction, corrosion, scaling, leakage, and deteriorated rubber parts. Inspect ignition and fuel-system components, filters, hoses, electrical grounds, batteries, charging equipment, engine mounts, coupling or drive connections, and the exhaust system for deterioration or unauthorized modifications. Where a sterndrive or shaft arrangement is fitted, examine bellows, seals, bearings, alignment points, propeller condition, gear lubricant condition, and mounting hardware as applicable to the actual installation. During a running test, observe cold and warm starting, idle quality, charging voltage indication, cooling behavior, exhaust discharge, alarms, abnormal vibration or noise, shifting, and response under available load. Use the exact manufacturer documentation for service intervals, diagnostic specifications, fluid requirements, tightening values, alignment limits, and wear criteria.
Free of charge — we forward your request to qualified suppliers for Ilmor Engineering equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Ilmor Engineering NLMRM06.20H1 — a part, a service call, a second opinion. Are you Ilmor Engineering? Claim this brand page.
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.