OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Heat Exchangers› Plate Heat Exchanger› Alfa Laval AlfaQ-27-30P

AlfaQ-27-30P

Plate Heat Exchanger · Heat Exchangers

Technical data from manufacturer or class sources · not yet verified by a person

Alfa Laval S.p.A. AlfaQ-27-30P is listed in this library as a marine heat exchanger in the Heat Exchangers / Heat Exchanger category. Equipment of this class is typically installed in the machinery space as part of a cooling, heating, lubricating-oil, fuel, or process circuit. Its shipboard purpose is to transfer heat between two fluid circuits without normally mixing the media. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the installed configuration. Where adjacent models in the same product family differ in rating, size, materials, control options, certification, or accessories, refer to the manufacturer documentation for the exact model-specific differences.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Model numberAlfaQ-27-30P
Plate count (min)16 plates
Plate count (max)250 plates
Max flow rate16.0 m3/h
Design pressure16 bar
Applicationtwo-phase condensation
Plate materialStainless steel (AISI 316)
Brazing materialStainless steel filler
Plate count (configured)51 plates
Effective flow rate at duty point16.0 m3/h
Configuration30P configuration
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect for external leakage, corrosion, abnormal temperature difference, flow restriction, and evidence of cross-contamination. Trend inlet and outlet temperatures and differential pressure where instruments are fitted, clean the heat-transfer surfaces using an approved method, and verify tightening or assembly against the manufacturer documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Keep the applicable gasket or seal set, connection seals, and any model-specific plate, tube, or fastening items recommended by the manufacturer. For the exact spare quantities and part numbers, refer to the manufacturer documentation.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Alfa Laval equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Plate Heat Exchanger.

Other models of the same equipment type, Alfa Laval first.

By manufacturer Alfa LavalGEASondexFunkeKelvionHisakaTranterVahterusAPVTwin DiscYorkKelvion PHE GmbHSWEP (Sweden)A.S.T.R.A. REFRIGERANTI S.r.l.PTG FrioNordica ASAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Alfa Laval models More like AlfaQ-27-30P
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Alfa Laval AlfaQ-27-30P — a part, a service call, a second opinion. Are you Alfa Laval? Claim this brand page.

Service engineer? Write the day report for this AlfaQ-27-30P in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.