Ölwasserabscheider (15 ppm) · Öl-Wasser-Separator
The Alfa Laval S.p.A. PureSOx-Multi-2 is part of the PureSOx wet marine exhaust-gas cleaning system family used to reduce sulphur oxides in engine exhaust. Despite the category shown in the supplied equipment list, PureSOx is an exhaust-gas cleaning system rather than an oily water separator. Wash water contacts the exhaust gas so sulphur compounds are transferred from the gas stream into the liquid phase before the cleaned exhaust is discharged through the vessel's exhaust system. The Multi designation belongs to a PureSOx arrangement intended for vessel-specific integration of more than one exhaust source; the exact source count and duct arrangement must be confirmed from the project documentation. The exact operating arrangement of this unsuffixed entry—open-loop, closed-loop, hybrid or hybrid-ready—must be confirmed from the vessel-specific PureSOx documentation. The model suffix must not be used to infer a verified engine-power rating, gas-flow capacity or water-flow requirement; refer to the manufacturer documentation for the exact figure.
Haben Sie das Herstellerdatenblatt zu diesem Modell? Schicken Sie es mit dem Anfrageformular — wir prüfen es und nennen die Quelle.
Was unsere Servicearbeit und die Herstellerunterlagen zum Betrieb dieses Modells sagen.
Review emission and wash-water monitoring trends and compare them with the approved operating record rather than relying only on instantaneous values. Inspect scrubber internals, drains, piping, pumps, strainers, spray equipment and valves for deposits, corrosion, erosion and leakage during planned shutdowns. Verify calibration and condition of compliance-monitoring instruments and check valve-position feedback, interlocks and bypass arrangements where fitted. Closed-loop and hybrid systems require additional attention to circulation-water chemistry, dosing and water-cleaning equipment; all acceptance limits and calibration intervals must come from the approved manufacturer and statutory documentation.
Carry critical wash-water pump seals and service parts, strainer elements, valve-actuator and seal components, approved sensor consumables and calibration items, representative process transmitters where operationally justified, spray/distribution parts where replaceable, control-system fuses and corrosion-resistant gaskets matched to the installed configuration. Closed-loop or hybrid plants should additionally carry configuration-specific dosing and water-cleaning consumables specified by the manufacturer.
Kostenlos — senden Sie uns Ihre Anfrage zu Alfa Laval-Ausrüstung. Unser Team prüft sie und antwortet per E-Mail.
Weitere Modelle desselben Ausrüstungstyps, zuerst Alfa Laval.
Sagen Sie uns, was Sie für diesen Alfa Laval PureSOx-Multi-2 benötigen — ein Ersatzteil, einen Serviceeinsatz, eine zweite Meinung. Sind Sie Alfa Laval? Diese Herstellerseite beanspruchen.
Servicetechniker? Schreiben Sie den Tagesbericht für diesen PureSOx-Multi-2 in OceanSphere Work — Fotos, Stunden und Teile, als PDF für den Reeder. 14 Tage kostenlos testen →
Ja. Technische Daten, Dokumente und Servicehinweise zu diesem Modell sind ohne Konto lesbar. Ein Konto bringt gespeicherte Suchen und Anfragen dazu, es nimmt nichts weg.
Ja. Nennen Sie uns Hersteller, Modell und Bedarf — ein Mensch liest jede Anfrage und antwortet per E-Mail.
Schicken Sie uns das Typenschild oder den richtigen Wert. Wir prüfen ihn gegen das Herstellerdatenblatt oder den Klassifikationsdatensatz und aktualisieren die Seite.