OceanSphereENGINES
Library› Engine Room› Oily Water Separator› Oily Water Separator (15 ppm)› Alfa Laval PureSOx-I-25-Closed

PureSOx-I-25-Closed

Oily Water Separator (15 ppm) · Oily Water Separator

Technical data from manufacturer or class sources · not yet verified by a person​‍‌‌‍‌​‌‍‍‌‍‍⁠​‌‌⁠​‌

The Alfa Laval S.p.A. PureSOx-I-25-Closed is part of the PureSOx wet marine exhaust-gas cleaning system family used to reduce sulphur oxides in engine exhaust. Despite the category shown in the supplied equipment list, PureSOx is an exhaust-gas cleaning system rather than an oily water separator. Wash water contacts the exhaust gas so sulphur compounds are transferred from the gas stream into the liquid phase before the cleaned exhaust is discharged through the vessel's exhaust system. The I-design is an inline scrubber arrangement intended to reduce installation complexity where a straighter exhaust-gas path suits the vessel layout. This listed variant is identified as closed-loop, in which wash water is recirculated and its chemistry is controlled with an alkaline additive while a controlled bleed stream is treated according to the approved design. The model suffix must not be used to infer a verified engine-power rating, gas-flow capacity or water-flow requirement; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Model numberPureSOx-I-25-Closed
Engine power rating25 MW
Throat diameter900 mm
Scrubbing water flow500 m3/h
Weight (dry)35 t
ApplicationI-design scrubber, single engine; closed-loop scrubber, NaOH dosing
Operating modesOpen-loop, closed-loop, hybrid
ComplianceIMO MARPOL Annex VI 2020 sulphur cap
Operating modeclosed-loop scrubber, NaOH dosing
Mode suffixClosed
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Review emission and wash-water monitoring trends and compare them with the approved operating record rather than relying only on instantaneous values. Inspect scrubber internals, drains, piping, pumps, strainers, spray equipment and valves for deposits, corrosion, erosion and leakage during planned shutdowns. Verify calibration and condition of compliance-monitoring instruments and check valve-position feedback, interlocks and bypass arrangements where fitted. Closed-loop and hybrid systems require additional attention to circulation-water chemistry, dosing and water-cleaning equipment; all acceptance limits and calibration intervals must come from the approved manufacturer and statutory documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry critical wash-water pump seals and service parts, strainer elements, valve-actuator and seal components, approved sensor consumables and calibration items, representative process transmitters where operationally justified, spray/distribution parts where replaceable, control-system fuses and corrosion-resistant gaskets matched to the installed configuration. Closed-loop or hybrid plants should additionally carry configuration-specific dosing and water-cleaning consumables specified by the manufacturer.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Alfa Laval equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Oily Water Separator (15 ppm).

Other models of the same equipment type, Alfa Laval first.

By manufacturer Alfa LavalVictor MarineFacetRWO/VeoliaGEAJowaKangrimMAHLE NFVCompass Water SolutionsMarinflocDVZRWOWärtsiläMahle IndustriefiltrationHansun MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Alfa Laval models More like PureSOx-I-25-Closed
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Alfa Laval PureSOx-I-25-Closed — a part, a service call, a second opinion. Are you Alfa Laval? Claim this brand page.

Service engineer? Write the day report for this PureSOx-I-25-Closed in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.