OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Engine Room› Oily Water Separator› Oily Water Separator (15 ppm)› Alfa Laval S.p.A. PureSOx-U-35-Open

PureSOx-U-35-Open

Oily Water Separator (15 ppm) · Oily Water Separator

Technical data from manufacturer or class sources · not yet verified by a person

The Alfa Laval S.p.A. PureSOx-U-35-Open is part of the PureSOx wet marine exhaust-gas cleaning system family used to reduce sulphur oxides in engine exhaust. Despite the category shown in the supplied equipment list, PureSOx is an exhaust-gas cleaning system rather than an oily water separator. Wash water contacts the exhaust gas so sulphur compounds are transferred from the gas stream into the liquid phase before the cleaned exhaust is discharged through the vessel's exhaust system. The U-design uses a U-shaped exhaust-gas path with separate treatment sections arranged to suit installations where that geometry is advantageous. This listed variant is identified as open-loop, in which seawater provides the scrubbing medium and treated wash water is discharged subject to the applicable discharge requirements. The model suffix must not be used to infer a verified engine-power rating, gas-flow capacity or water-flow requirement; refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.

Model numberPureSOx-U-35-Open
Engine power rating35 MW
Throat diameter1100 mm
Scrubbing water flow650 m3/h
Weight (dry)52 t
ApplicationU-design scrubber, 35 MW; open-loop scrubber, seawater alkalinity
Operating modesOpen-loop, closed-loop, hybrid
ComplianceIMO MARPOL Annex VI 2020 sulphur cap
Operating modeopen-loop scrubber, seawater alkalinity
Mode suffixOpen
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Review emission and wash-water monitoring trends and compare them with the approved operating record rather than relying only on instantaneous values. Inspect scrubber internals, drains, piping, pumps, strainers, spray equipment and valves for deposits, corrosion, erosion and leakage during planned shutdowns. Verify calibration and condition of compliance-monitoring instruments and check valve-position feedback, interlocks and bypass arrangements where fitted. Closed-loop and hybrid systems require additional attention to circulation-water chemistry, dosing and water-cleaning equipment; all acceptance limits and calibration intervals must come from the approved manufacturer and statutory documentation.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Carry critical wash-water pump seals and service parts, strainer elements, valve-actuator and seal components, approved sensor consumables and calibration items, representative process transmitters where operationally justified, spray/distribution parts where replaceable, control-system fuses and corrosion-resistant gaskets matched to the installed configuration. Closed-loop or hybrid plants should additionally carry configuration-specific dosing and water-cleaning consumables specified by the manufacturer.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Alfa Laval S.p.A. equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Oily Water Separator (15 ppm).

Other models of the same equipment type, Alfa Laval S.p.A. first.

By manufacturer Alfa LavalVictor MarineFacetRWO VeoliaGEAJowaKangrimMAHLE NFVCompass Water SolutionsMarinflocMahle IndustriefiltrationWärtsiläOcean CleanTechni S.A.Jiujiang MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Alfa Laval S.p.A. models More like PureSOx-U-35-Open
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Alfa Laval S.p.A. PureSOx-U-35-Open — a part, a service call, a second opinion. Are you Alfa Laval S.p.A.? Claim this brand page.

Service engineer? Write the day report for this PureSOx-U-35-Open in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.