Alarm Monitoring & Control System (AMCS) · Automation & Control
Water In Oil Sensor by Kongsberg Maritime AS is a condition-monitoring sensor intended to detect water contamination in oil. It is normally installed at a lubricating-oil or hydraulic-oil sampling/flow point selected by the system designer and is connected to the vessel's alarm, monitoring or control architecture. The device converts a physical condition or field signal into information that can be supervised, alarmed or used by automation logic. Correct operation depends on sound sensor installation, stable power, intact cabling and valid calibration or configuration. It provides an oil-condition input rather than a conventional pressure or temperature alarm. For any model-specific range, wiring or alarm limit, refer to the manufacturer documentation for the exact figure.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
What our service work and the manufacturer documentation say about keeping this model running.
Compare displayed values with an independent reference or redundant sensor where possible, inspect cabling and terminals, and verify sensor mounting and process contact. Test alarm initiation and channel-failure supervision without defeating machinery protection. After replacing a module or sensor, confirm scaling, tag identity, alarm limits and configuration against the approved vessel documentation. Survey attention is on reliable alarm indication, traceable testing and any safety-critical shutdown interfaces; refer to the manufacturer documentation for the exact figure.
Carry compatible sensors or modules, connector/terminal items, control-power fuses and any approved signal-conditioning components used by the installed channel. Keep current configuration backups and calibration information for programmable or system-level modules.
Free of charge — send us your request for Kongsberg Maritime AS equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Kongsberg Maritime AS first.
Tell us what you need for this Kongsberg Maritime AS Water In Oil Sensor — a part, a service call, a second opinion. Are you Kongsberg Maritime AS? Claim this brand page.
Service engineer? Write the day report for this Water In Oil Sensor in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.