BeHydro 12VDZ DF H2 genset
Anglo Belgian Corporation BeHydro 12VDZ DF H2 genset — Marine auxiliary genset — hydrogen/diesel dual-fuel; offshore vessels, ferries; up to 85% hydrogen + 15% (bio)diesel/HVO.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Regular oil analysis and oil/filter change intervals per manufacturer schedule (typically every 500–1000 running hours for medium-speed engines)
Inspection and calibration of fuel injection equipment (injectors, high-pressure pumps, common rail pressure) and fuel filter replacement
Turbocharger inspection: blower wheel condition, bearing clearances, compressor/turbine fouling, surge behaviour under load
Cooling water system checks: freshwater and seawater circuit pressures, heat exchanger cleanliness, thermostat function, zinc anode condition
Exhaust valve and cylinder head condition check (valve clearances, valve seat wear, combustion chamber deposits) at major overhaul intervals
Alternator/generator inspection: winding insulation resistance (megger test), bearing condition, coupling alignment, AVR and excitation system
Emission aftertreatment system maintenance: SCR catalyst inspection, urea/AdBlue dosing system check, DPF back-pressure monitoring (where fitted)
Load test and governor/frequency response test after each maintenance period to verify rated output, voltage stability, and trip functions
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →