AXF 450/2
TF Marine AXF 450/2 — Engine room axial exhaust fan for yachts and mega yachts; 24V DC marine ventilation.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Inspect impeller blades for corrosion, erosion, cracks, and fouling buildup; verify bronze impeller integrity
Check motor insulation resistance and windings for moisture ingress or salt contamination; verify IP rating compliance
Inspect and clean motor-side protection grid for blockages, deformation, or corrosion
Verify vibration damping ring condition; check for deterioration, hardening, or mechanical looseness in mountings
Measure actual airflow output and compare against rated capacity; check for performance degradation
Inspect bearing condition for noise, play, and lubrication; replace per manufacturer interval
Check electrical connections, cable glands, and terminal blocks for corrosion, chafing, and watertight integrity
Verify flux orientation (suction vs. discharge direction) is correct as specified at order and matches installation requirement
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →