OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Heinen & Hopman

Axial Fans WMOR and WMOD

Heinen & Hopman Axial Fans WMOR and WMOD — Supply or exhaust ventilation in seagoing ships with unrestricted cruising area and offshore objects; can be installed inside compartments or on weather decks. ATEX explosion-proof variant available..

Components & Design

Component data being added…

Technical Data

casing Steel pipe with drilled flanges, hot-dip galvanized
impeller material Aluminum alloy, dynamically balanced, sea-water-resistant
motor 3-phase induction squirrel cage, marine execution, 50 Hz and 60 Hz
IP class IP55 standard
options ATEX explosion-proof

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Inspect impeller blades for corrosion, erosion, or mechanical damage; re-balance dynamically if any material loss or deformation is detected.

Inspect impeller blades for corrosion, erosion, or mechanical damage; re-balance dynamically if any material loss or deformation is detected.

Check motor bearings for abnormal noise, vibration, and temperature; lubricate or replace per manufacturer intervals (typically every 2,000–4,000 operating hour

Check motor bearings for abnormal noise, vibration, and temperature; lubricate or replace per manufacturer intervals (typically every 2,000–4,000 operating hours).

Verify motor insulation resistance (megger test) and check terminal connections for tightness and absence of moisture ingress.

Verify motor insulation resistance (megger test) and check terminal connections for tightness and absence of moisture ingress.

Inspect casing, flanges, and mounting bolts for corrosion, cracks, or loosening; re-torque fasteners and touch up protective coating (hot-dip galvanizing or epo

Inspect casing, flanges, and mounting bolts for corrosion, cracks, or loosening; re-torque fasteners and touch up protective coating (hot-dip galvanizing or epoxy) as needed.

Check shaft seals and labyrinth rings for wear; ensure no ingress of seawater or condensate into the motor housing.

Check shaft seals and labyrinth rings for wear; ensure no ingress of seawater or condensate into the motor housing.

Test ATEX integrity on explosion-proof variants: verify flame-proof enclosure gaps, cable gland integrity, and earth bonding continuity.

Test ATEX integrity on explosion-proof variants: verify flame-proof enclosure gaps, cable gland integrity, and earth bonding continuity.

Clean air inlet and outlet screens/grilles; remove accumulated dust, salt deposits, and biological fouling to prevent reduced airflow and overheating.

Clean air inlet and outlet screens/grilles; remove accumulated dust, salt deposits, and biological fouling to prevent reduced airflow and overheating.

Functional test under load: verify airflow direction, measure current draw against nameplate rating, and confirm speed control (if fitted) operates across full

Functional test under load: verify airflow direction, measure current draw against nameplate rating, and confirm speed control (if fitted) operates across full range without hunting or overload.

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #152572 · ✓ still in production

Wer liefert dieses Teil? 15 Betriebe im Verzeichnis

Heinen & Hopman
NoneNetherlands
✓ autorisiert
Heinen & Hopman Marine Equipment (Shanghai)
NoneChina
✓ autorisiert
LeBlanc & Associates, LLC
Houma, United States
✓ autorisiert
Teknotherm Marine AS
NoneNorway
✓ autorisiert
A. Nobel en Zn. - Filtration & Separation B.V. (Headquarters)
NoneNetherlands
Dan Marine Shanghai Ltd.
NoneChina|Greece
Dingbro Ltd Industrial Filtration Division
NoneUnited Kingdom
Dolphin Marine Engineering & Trading Co., Ltd
China
El shaddai shipping
NoneTogo
GES SHIP
NoneTurkey|Georgia|Norway|Denmark|Finland|Italy|Kazakstan|Latvia|Portugal|Russian Federation|Spain|Azerbaijan|Turkmenistan|Egypt|Belgium|Malta|Libya
Galata Ship Supply Inc.
Turkey
HYDRUS ENGINEERING SA
Greece
Alle Betriebe für Heinen & Hopman ansehen →