Turbulo-MPB TMPB 10
SKF Turbulo-MPB TMPB 10 — 15 ppm bilge water separator for larger vessels, offshore platforms and land-based applications; IMO MEPC.107(49) compliant.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check oil content monitor (OCM) reading: discharge must be ≤15 ppm; verify calibration and alarm function per IMO MEPC.107(49)
Inspect and replace HycaSep (second-stage hydrocarbon separator) elements at recommended intervals; check pressure differential across stage 2
Inspect and clean first-stage oleophilic coalescer inserts (HEC elements); check for fouling, clogging or mechanical damage
Check helical rotor pump condition: seals, wear of rotor/stator, run-dry protection function, and shaft seal integrity
Verify automatic oil-discharge valve and level-control system operation; check float switch, solenoid valves and oil sighting glass
Inspect heating coil (if fitted for HFO service): check for leaks, corrosion and correct thermostat function
Check safety valve, pressure gauges, and system operating pressure (rated 2.5 bar, 3.5 bar optional); confirm relief settings
Review ORB (Oil Record Book) entries; verify three-way bilge/overboard valve interlocks prevent direct overboard discharge when OCM alarm is active
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →