⚓ Working on this equipment?

Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.

Start free — 14 days →

No credit card required

🔧 1 verified suppliers & service companies for EMCÉ Winches in the Maritime Network Find suppliers →

Is EMCÉ Winches your company? Claim this page

EMCÉ Winches

A30 H / A30 L / A30 M

Name: EMCÉ Winches A30 H / A30 L / A30 M
Brand: EMCÉ Winches
SKU: OSE-152425

EMCÉ Winches A30 H / A30 L / A30 M — Electric single-drum towing / ship winch (marine, heavy duty pulling and traversing up to 650 kg).

Components & Design

Component data being added…

Technical Data

power kW 0.37 (A30 L), 1.1 (A30 M), 1.5 (A30 H) — S2 duty, 400V AC 3-phase

SWL t 0.6 t (A30 L, 600 kg) / 0.65 t (A30 H and A30 M, 650 kg) WLL first layer

speed rpm 3 m/min (A30 L first layer) / 8.5 m/min (A30 M) / 13 m/min (A30 H first layer)

weight kg 70 (A30 L and A30 M) / 75 (A30 H)

rope diameter mm 8

drum capacity m 6 m first layer / 44 m top layer (5 layers)

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Brake system inspection: check oil-bath disc brake and/or band brake for wear, oil level, and correct spring tension; verify fail-safe engagement under load

Wire rope/cable inspection: examine for broken wires, kinks, corrosion, flattening, and correct fleet angle onto drum; check termination and drum anchor point

Drum and flanges: inspect drum surface for grooves, cracks, and corrosion; verify proper level-winding and equal rope layering across drum width

Gearbox inspection: check for oil leaks, correct oil level and grade, unusual noise or vibration; inspect planetary or worm gear mesh and bearing condition

Motor and drive unit: test electric/hydraulic/pneumatic motor for overheating, abnormal current draw, air/fluid leaks, and correct pressure or voltage at rated

Motor and drive unit: test electric/hydraulic/pneumatic motor for overheating, abnormal current draw, air/fluid leaks, and correct pressure or voltage at rated load

Structural and mounting integrity: inspect winch frame, foundation bolts, welds, and deck/base plate for cracks, corrosion, and proper torque; verify lifting lu

Structural and mounting integrity: inspect winch frame, foundation bolts, welds, and deck/base plate for cracks, corrosion, and proper torque; verify lifting lug condition if applicable

Control system and limit switches: function-test control valves, push-buttons, remote controls, overload protection, and any automatic load-sensing devices; ver

Control system and limit switches: function-test control valves, push-buttons, remote controls, overload protection, and any automatic load-sensing devices; verify emergency stop operation

Corrosion protection and coating: inspect paint/coating condition (ISO 12944 C4-High or marine-grade systems); treat any bare metal areas and check sacrificial

Corrosion protection and coating: inspect paint/coating condition (ISO 12944 C4-High or marine-grade systems); treat any bare metal areas and check sacrificial anodes on marine installations

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents

🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →

🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Working on this unit?

Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.

Need a service partner for EMCÉ Winches?

114,000+ shipyards, suppliers and service companies in the Maritime Network directory.

Equipment Model #152425 · ✓ still in production