SP4H300E (SP Series, 4-cylinder, H-motor variant)
Refcomp S.r.l. SP4H300E (SP Series, 4-cylinder, H-motor variant) — Refrigeration condensing units; commercial and industrial refrigeration.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Check valve plates and valve reeds for wear, cracking or carbon deposits; replace at manufacturer-recommended intervals
Inspect and change crankcase oil at prescribed intervals; verify correct oil type (POE or mineral) and check oil level sight glass
Verify crankcase heater function before startup and after extended shutdowns to prevent refrigerant migration and liquid slugging
Check suction and discharge pressure and compare against expected values for operating conditions; investigate deviations promptly
Inspect shaft seals and gaskets for refrigerant leaks using electronic or UV leak detection methods
Check motor winding resistance and insulation resistance (Megger test) to detect moisture ingress or incipient winding failure
Inspect and clean suction strainer / filter to prevent contamination ingress into cylinder bores and valve gear
Verify oil differential pressure protection (oil pressure switch) is functional and set within manufacturer specification
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →