OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 27 verified suppliers & service companies for Pall Corporation in the Maritime Network Find suppliers →
Is Pall Corporation your company? Claim this page
Pall Corporation

LCS4H2HH (PhaseSep Liquid/Liquid Coalescer)

Pall Corporation LCS4H2HH (PhaseSep Liquid/Liquid Coalescer) — Liquid/Liquid Coalescer 40-inch - separates water and oil emulsions for fuel treatment applications.

Components & Design

Component data being added…

Technical Data

diameter inch 3.75
length inch 40
separation level ppm 15
max temperature celsius 149
max temperature fahrenheit 300
pressure drop initial bar 0.138
pressure drop changeout bar 1.033

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Inspect cartridge/element condition for damage, tears, or degradation and replace at recommended intervals (typically 6-365 days depending on duty)

Inspect cartridge/element condition for damage, tears, or degradation and replace at recommended intervals (typically 6-365 days depending on duty)

Check differential pressure across coalescer media or filter to monitor element loading and performance degradation

Check differential pressure across coalescer media or filter to monitor element loading and performance degradation

Monitor water sensor and level indication systems to detect water accumulation in sump or separator vessel

Monitor water sensor and level indication systems to detect water accumulation in sump or separator vessel

Verify all inlet and outlet connections and manual/automatic drain valves for proper operation and leaks

Verify all inlet and outlet connections and manual/automatic drain valves for proper operation and leaks

Test and record pressure readings at inlet and outlet to identify performance changes that indicate service requirement

Test and record pressure readings at inlet and outlet to identify performance changes that indicate service requirement

Inspect all gaskets, seals, and O-rings for deterioration, degradation, or weeping that could allow water/fuel bypassing

Inspect all gaskets, seals, and O-rings for deterioration, degradation, or weeping that could allow water/fuel bypassing

Verify non-return valves (check valves) function correctly to prevent backflow and cross-contamination

Verify non-return valves (check valves) function correctly to prevent backflow and cross-contamination

Monitor and maintain proper fluid levels in separator/sump compartment to ensure adequate detention time and separation efficiency

Monitor and maintain proper fluid levels in separator/sump compartment to ensure adequate detention time and separation efficiency

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #150784 · ✓ still in production