LTB 40
Atlas Copco LTB 40 — Air & Nitrogen Booster for high pressure generation (starting air alternative).
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Pressure gauge readings and calibration - verify accuracy and ensure correct pressure display (30 bar for LT series)
Condensate drain and water separator inspection - drain accumulated moisture daily and inspect water separator for saturation
Oil level and condition - maintain oil within recommended range; check for contamination, discoloration, or sludge formation
Air intake filter and element replacement - inspect and replace clogged filter elements to prevent component damage
Safety relief valve operation - verify functionality and pressure setting of all relief valves on compressor and receiver
Cooling system (water-cooled models) - check cooling water flow, temperature, corrosion/sediment in cooling circuit
Piston rings and valve plate wear - inspect for wear, scoring, or carbon deposits affecting sealing efficiency
Receiver tank integrity - check for external corrosion, rust spots, dents, and verify pressure vessel safety compliance
Vibration and noise levels - monitor for unusual vibrations (<14 mm/sec per design) or abnormal sounds indicating mechanical issues
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →