LT 40-30 KE

Pressure gauge readings and calibration - verify accuracy and ensure correct pressure display (30 bar for LT series)

Condensate drain and water separator inspection - drain accumulated moisture daily and inspect water separator for saturation

Oil level and condition - maintain oil within recommended range; check for contamination, discoloration, or sludge formation

Air intake filter and element replacement - inspect and replace clogged filter elements to prevent component damage

Safety relief valve operation - verify functionality and pressure setting of all relief valves on compressor and receiver

Cooling system (water-cooled models) - check cooling water flow, temperature, corrosion/sediment in cooling circuit

Piston rings and valve plate wear - inspect for wear, scoring, or carbon deposits affecting sealing efficiency

Receiver tank integrity - check for external corrosion, rust spots, dents, and verify pressure vessel safety compliance

Vibration and noise levels - monitor for unusual vibrations (<14 mm/sec per design) or abnormal sounds indicating mechanical issues