SF400X
Seasmart SF400X — Fixed mooring roller fairlead stainless steel for yachts and sailboats.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Roller condition and integrity: Check for cracks, uneven wear, corrosion, or seized rollers; ensure smooth rotation
Delrin roller wear and degradation: Inspect polymer rollers for material loss, surface damage, or loss of friction-reducing properties
Fastening and mounting bolts: Verify all M10 (SF240/SF240X) and M12 (SF400/SF400X) mounting screws are tight and not corroded
Drain holes and water drainage: For flush fairleads (FF series), ensure drainage fittings are clear and functioning to prevent water accumulation
Mooring line abrasion marks: Check fairlead surfaces for grooves, sharp edges, or damage that could fray or damage mooring lines
Corrosion and material degradation: Inspect anodised aluminium finish for pitting, loss of anodise layer, and stainless steel (X series) for crevice corrosion
Alignment and concentricity: Verify fairlead axis is perpendicular to deck and properly aligned with mooring line path
Grease and lubrication of rollers: Apply multipurpose marine grease to all rotating parts; check grease nipples are clean and rust-free
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →