FD351
Corken FD351 — Two-stage industrial vertical compressor for high-pressure applications.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Daily inspection of crankcase oil pressure gauge; verify against model specifications; address leaks or contamination immediately
Monitor discharge pressure gauge daily; verify pressure relief valve function; check for blocked discharge lines or valve leakage
Weekly visual inspection of packing cartridge area; check for oil weeping or gas escape; verify adjustable packing screw tension; replace packing assemblies per IOM schedule
Weekly oil level check on sight glass; drain water/condensation from accumulation points; change oil per maintenance schedule (typically annually); verify oil grade per manual
Monthly inspection of valve assemblies; check for liquid carryover in discharge; test compression on both stages; inspect valve seats and bumpers for scoring; replace valve plates if damaged
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →