Centrifugal Pump · Pumps
Behrens VRF 9/350G — Vertical inline centrifugal pump - Main seawater cooling, LT fresh water.
Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.
Source: zedmar.com · not checked against a manufacturer datasheet
| Mechanical seal inspection | typically every 4,000-6,000 running hours or annually, whichever comes first - confirm against the maker's maintenance schedule |
|---|---|
| Bearing lubrication/grease renewal | typically every 4,000-8,000 running hours depending on bearing type and grease spec |
| Coupling alignment check | annually, and after any work disturbing pump or motor position |
| Suction strainer cleaning | per operational schedule, more frequently in silty or biofouled water |
| Wear ring/impeller clearance check | at major overhaul, typically every 2-4 years of continuous service |
Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.
| Casing wear ring radial clearance | typically 0.3-0.5 mm for centrifugal pumps in this capacity class - confirm against the maker's manual before condemning a ring |
|---|---|
| Shaft/bearing radial play | renewal is typically indicated once play exceeds roughly 0.05-0.10 mm above the as-new value - verify against maker tolerances |
Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.
As an essential seawater cooling pump, this unit typically falls under Continuous Survey of Machinery where the ship carries that notation; surveyors look for a satisfactory running/performance test, up-to-date seal and bearing maintenance records, and evidence that standby capacity is available
Estimated lifetime: No standard running-hour figure applies to a seawater centrifugal pump; service life is normally expressed in years (commonly 15-25 years) and is driven by seal and bearing renewal cycles and water quality rather than a fixed hour count
Free of charge — send us your request for Behrens equipment. Our team checks it and replies by e-mail.
Other models of the same equipment type, Behrens first.
Tell us what you need for this Behrens VRF 9/350G — a part, a service call, a second opinion. Are you Behrens? Claim this brand page.
Service engineer? Write the day report for this VRF 9/350G in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.