F30CY.0 / F30CY active
Fassi Gru S.p.A. F30CY.0 / F30CY active — Deck crane, light-duty ship handling.
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of epoxy zinc plating (70 microns), epoxy primer (100 microns), polyurethane glaze (70 microns) totaling 240 microns dry film thickness; measure coating thickness; perform salt fog test per ASTM B117 minimum 1500h
Inspect main and secondary jack rods for hardened chemical nickel plating (50 microns) and chrome plating (100 microns) integrity; check extension jack rods and rotation cylinders for double chrome damage; assess pitting and salt deposits
Verify IP65 protection rating on all electrical components; inspect connector seals and dielectric grease application; test insulation resistance; check for corrosion in wiring harnesses and control enclosures
Inspect hydraulic hoses for external corrosion cracks and salt deposits; verify marine-grade distributor isolation from saltwater; test hydraulic fluid moisture and contamination levels; check all seal integrity on cylinders
Inspect monolithic cast iron and steel base structure for micro-cracks; verify all weld integrity; assess stress corrosion cracking risk; confirm special marine base mounting security on vessel; check penetration point seals
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →