Ei208iRF
Minimax Ei208iRF — Carbon Monoxide Detector - Home with RF (Battery-Powered).
Components & Design
Component data being added…
Technical Data
🤖 Ask about this model
One free question — answered like a marine engineer. No account needed.
Common failures & inspection points
Visual inspection of detector lens and internal optical elements for dust, insect debris, corrosion, or condensation; perform monthly visual check and semi-annual smoke-entry functional test per NFPA 72
Sensitivity testing of detector elements within 1 year after installation and every 2 years thereafter; for aspirating systems, verify suction pressure (>400 Pa) and air sample integrity
Visual inspection for cracks, corrosion, impact damage; verify mounting security and alignment; check for loose connectors or cable damage; test mechanical self-testing indicators (for YMX5000 cyclic optics monitoring)
Functional test of detector signal transmission to control panel; verify alarm and fault relay operations; test communication loop continuity; check battery status (for battery-powered units like Ei series), expected 10-year life
Document installation date; replace heat detectors (WMX series) after 15 years maximum service life; replace aspirating smoke detectors (AMX series) per manufacturer recommendations typically 20-25 years; check for obsolescence of electronic components
Type-general inspection and maintenance points for this equipment category — not model-specific.
Suppliers & Spare Parts
Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.
📄 Request sourcing links & documentsCases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.
Start free trial →Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.
Maritime Network →